The Red Armor Submersible Turbine Pump (STP) is responsible for driving fuel from the storage tank, through the piping infrastructure, and into the vehicle through the use of pressure energy. The Red Armor STP has all the advantages of the Red Jacket STP but is now designed to withstand corrosive environments. Whether your site is struggling with Ethanol-induced in-sump corrosion or ULSD-induced in-tank corrosion, with its specialty coating and stainless-steel construction, the Red Armor solution is designed to survive.
Red Armor is a robust fixed-speed fuel pump with a motor that delivers higher flow rates than comparable submersible fuel motors for corrosive environments, promoting optimal fuel flow and dispensing. The Red Armor STP also features Red Jacket’s advanced packer manifold design, making it the industry’s easiest and safest STP to install and service. Available in 3/4 HP to 2 HP configurations in variable Quick Set (Adjustable) lengths.
Red Armor’s specialty coating is the toughest performer across a battery of abrasion, immersion, and impact standards.
Features
In-Sump Protection from Corrosion- Added protection on all exposed surfaces
- Specialty coating on all cast surfaces withstands acetic acid exposure to prevent pitting and deterioration over time
- Stainless Steel construction on all exposed surfaces ensures easy maintenance for the life of the pump, including; riser, nuts, springs, screws, check valve seat, eye bolt, and check valve guide
- All the advantages of The Red Jacket Packer Manifold design
- Built-in Isolated Contractor’s Box
- Easy to Install and Service
- Increased Electrical Safety
- Environmentally Friendly
- Innovative Check Valve Design
- Prevent corrosion
- Constructed with upgraded materials
- Powder-coated discharge head, stainless column pipe and quick-set connector
- All the advantages of The Red Jacket UMP design:
- Up to 5% Increased Flow with 8% Less Power Consumption
- Improved Reliability and Increased Safety
- Better Quality
- Universal Compatibility
Specifications
- Series: Red Armor STP - Quick Set (Adjustable) Length
- Model: AGP75S1
- Length: 72 - 222 in. - Measured from top of the eyebolt to the bottom of the motor inlet
- Horse Power (HP): 0.75
- Kilowatt (KW) 0.56
- Voltage: 208/230
- Phase: Single
- Max. Flow Rate: 68 GPM
- Fuel Compatibility:
- 100% Gasoline
- 100% Diesel
- 0-100% Biodiesel blends
- Jet fuel
- AVGAS
- Kerosene and Fuel Oil
- Methanol concentrations up to 100%
- Ethanol concentrations up to 100%
- MTBE, ETBE, or TAME concentrations up to 20%
- Hardware Construction:
- Column Pipe and Riser: Stainless Steel
- Packer Components: Stainless Steel
- Protective Coatings: Exposed Cast Iron Covered with Specialized Dual Powder/E-Coating
- Operation Environment:
- Class 1, Group D atmospheres
- High Corrosion Environment
- Wet or Dry Sump Space (Water Ingress)
- Packer Manifold Access Ports:
- Siphon Ports: 2 Available, 1/4 in. NPT; Vacuums Generated up to 25 in. Hg.
- Line Pressure Port: 1 Available, 1/4 in. NPT
- Vent Port: 1 Available, 1/4 in. NPT
- Check Valve Compatibility:
- Standard VR Ready Check Valve for PLLD
- High Pressure Check Valve for High Pressure Applications
- Agency:
- UL Listings: 100% Diesel, 100% Gasoline, Gasoline and up to: 10% Ethanol, 15% Methanol, 20% MTBE, 20% ETBE, 20% TAME
- Other Agency Listings: cUL
Downloads
Installation, Service, & Parts List (PDF Download)
Specifications Sheet (PDF Download)
Red Armor STP Built to Combat Corrosion (PDF Download)
Red Armor STP Product Literature (PDF Download)
Red Jacket/Red Armor STP Fuel Compatibility (PDF Download)
Red Jacket/Red Armor Fixed Speed Reliability (PDF Download)
The Benefits to Owning a Red Jacket/Red Armor (PDF Download)
