GPI M-180 Series 12V DC Fuel Transfer Pump w/ Manual Nozzle & Filter Kit - 18 GPM

The M-180S 12 volt pump delivers up to 18 GPM (68 LPM). The increased flow rate reduces the time required for fuel transfer. Convenient Spin Collar allows for ease of installation and pump orientation. UL Listed and CSA Certified Motor is Overload Protected for long life. This package includes the M-180 pump with a manual nozzle and a GPI filter, filter adapter plus a Filter Installation Kit. This pump and filter combo makes installation quick and easy.

Note: During installation make sure all threaded fuel connections are wrapped with three to four turns of thread tape or a pipe thread sealant approved for use with petroleum fuels.

Features

• Long life and trouble-free operation
• Lockable nozzle holder
• Factory-installed power cord - reduces installation time
• Spin collar mount for easy installation and pump orientation
• UL Listed and CSA certified motor

Specifications

• Inlet/Outlet: 1 in. NPT
• Mounting: 2 in. NPT
• Flow Rate: 18 GPM (69 LPM)
• Voltage: 12V DC
• Compatible Fluids: Diesel, Gasoline, E15, and Kerosene
• Duty Cycle: 30 min. ON, 30 min. OFF
• Operating Pressure: 15 PSI (1.03 bar) - Standard Pressure
• Operating Temperature: -20°F to 125°F (-29°C to 52°C)
• Pump Housing: Corrosion Resistant Diecast Aluminum
• Power Cord: 18 ft. (5.5 m), 12/2 AWG
• Type: Rotary Gear
• Current Draw: 20 Amp
• Motor: 2000 RPM, 1/4 HP, UL Listed to US and Canadian Standards
• Warranty: 2 Year
• Common Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Package Contents

• M-180 Series Fuel Transfer Pump
• Manual Nozzle
• GPI Filter
• Filter Adapter
• Filter Installation Kit
• 1 in. x 12 ft. Dispensing Hose
• 15 to 40 in. Telescoping Suction Pipe
• Spin Collar

Downloads

GPI M-150S - M-180S and M-240S Fuel Transfer Pump Owners Manual (PDF Download)