Gorman Rupp's Shield-A-Spark 80 Series Diesel Engine Driven Self Priming Centrifugal Pump is suitable for all petroleum, industrial, construction and agricultural flammable fluid handling needs. All diesel driven models are equipped with the latest engines that meet Tier IV emission regulations.
Warning: This unit is designed to handle volatile, flammable liquids. To reduce the risk of fire or explosion, do not operate near open flames, sparks, cigarettes or any other ignition source. Do not operate the unit in an explosive atmosphere or unventilated area. Connect the attached ground cable to the nearest grounding point on the tank being filled. Shut off the engine and allow it to completely cool before refueling.
Features
- Self-priming centrifugal pump
- Spark and splash shielded engine, muffler and fuel cap
- Pump has a 90° ductile iron discharge elbow
- Engine has a 90° exhaust deflector, exhaust silencer muffler with guard, and grounding wire
- Rollover base with rubber feet
Specifications
Product Overview:- Model: 82D1-L70W FT4-X
- Series: 80
- Size: 2 in. x 2 in. FNPT
- Max. Flow Rate: 151 GPM
- Casing: Aluminum
- Impeller/Rotor: Aluminum
- Seal: Silcon Carbide
- Drive: Diesel Engine XP
- Size: 2 in. x 2 in. (51 mm. x 51 mm.) NPT †Female
- Casing: Aluminum 356â€T6 with Gray Iron 30 Cutwater Insert - Maximum Operating Pressure 68 psi (469 kPa)*
- Semiâ€Open Type, Four Vane Impeller: Aluminum 356â€T6 Handles 5/8 in. (15.8 mm.) Diameter Spherical Solids
- Replaceable Wear Plate: Carbon Steel 1026
- Intermediate Bracket: Gray Iron 30
- Seal: Type 31, Mechanical, Selfâ€Lubricated - Silicon Carbide Rotating and Stationary Faces - Fluorocarbon Elastomers (DuPont Viton or Equivalent) - Stainless Steel 18â€8 Cage and Spring - Maximum Temperature of Liquid Pumped 160°F (71°C)*
- Shaft Sleeve: Stainless Steel 304
- Flap Valve: Gray Iron 30 and Steel with Nitrile Coated Nylon Gasket
- Flange: Gray Iron 30
- Gaskets: Cork, Vegetable Fiber
- Hardware: Standard Plated Steel
- Standard Equipment: 90° Ductile Iron Discharge Elbow - Rollover Base with Rubber Feet
- Optional Equipment: Wheel Kit w/Semiâ€Pneumatic Tires - Please Call 1-800-333-3331 for More Information
*Consult Factory for Applications Exceeding Maximum Pressure and/or Temperature Indicated
Engine Specifications:- Model: Yanmar L70W
- EPA Tier: Final Tier 4
- Type: Four Cycle, Air Cooled, Diesel Engine
- Displacement: 18.7 Cu. In. (320 cc)
- Lubrication: Forced Circulation
- Air Cleaner: Dry Type
- Fuel Tank: .87 U.S. Gals. (3.3 liter)
- Full Load Operating Time: 1.4 Hrs
- Starter: Rope Rewind
- Standard Features: 90° Exhaust Deflector - Exhaust Silencer Muffler w/Guard - Grounding Wire
Yanmar Published Performance: Maximum Continuous Net BHP 5.8 (4.3 kW) @ 3600 RPM
Downloads
Installation, Operation, and Maintenance Manual (PDF Download)
Product Data Sheet (PDF Download)
Performance Curves (PDF Download)
