Petroclear 40830P-DV 30 Micron Particulate Spin-On Fuel Filter w/ Drain Valve

The PetroClear® 40830P-DV is a spin-on filter that utilizes a 30 micron (nominal) cellulose media to remove particulate from neat gasoline, ethanol blended gasolines, diesels, biodiesel, ULSD (ultra low sulfur diesel), kerosene and fuel oils. The filter utilizes a silicone treated media that repels water from fuel and prevents the water from passing through the filter into consumers' equipment. The water settles to the dome end and a petcock type drain valve located in the bottom of the filter permits convenient drainage of collected water.

This filter has a standard 1 – 12 UNF mounting thread (3/4 in. flow) required for most spin-on filter adapters used in aftermarket.

Notes: Designed for particulate removal only. Will not react to water in fuels or phase separation in ethanol blended gasoline to slow flow. Not approved for use on retail fuel dispensers. Not to be used in aviation fuel applications.

Features

• Designed for particulate (dirt, dust, rust) removal only (30 micron)
• Utilizes a silicone treated media that repels water
• Includes petcock type drain valve
• Not approved for use on retail fuel dispensers

Specifications

• Model: 40830P-DV
• Filter Type: Spin-On
• Media Type: Cellulose with Silicone Treatment - Particulate Removing
• Used With: Neat Gasoline, Ethanol Blended Fuels and Diesels - Including Biodiesel
• Micron Rating: 30 Micron (Nominal)
• Diameter: 3.70 in.
• Height: 6.87 in.
• Mounting Thread: 1 in. - 12 UNF
• Flow Rate: 25 GPM (94.6 LPM)
• Flow: 3/4 in. Flow
• Shell Thickness: 0.020
• Gasket Material: Nitrile Rubber
• Max. Operating Pressure: 50 psi (3.4 bar)
• Collapse (Min.) 150 psid (10.3 bar)
• Burst (Min.) 250 psi (17.2 bar)
• Max. Operating Temp. 250°F (139°C)

Downloads

Petroclear Filter Label Legend (PDF Download)