Racor FBO Series Filtration Assemblies are designed to meet the tough conditions of today’s industrial and marine refueling operations. They can be used for a variety of applications, including mobile refuelers, refueling cabinets, diesel fuel dispensing pumps, and primary fuel filter/water separators on large diesel engines.
The assemblies feature a locking ring collar, which attaches the filter housing to the aluminum die-cast filter head with four oversized wing bolts. The locking ring collar allows a single person to perform service by hand-loosening the four collar bolts, rotating and lowering the bowl assembly, and removing the dirty element. With the new element installed, the procedure is reversed. The wing bolts are then hand tightened to complete the service.
The assemblies feature a locking ring collar, which attaches the filter housing to the aluminum die-cast filter head with four oversized wing bolts. The locking ring collar allows a single person to perform service by hand-loosening the four collar bolts, rotating and lowering the bowl assembly, and removing the dirty element. With the new element installed, the procedure is reversed. The wing bolts are then hand tightened to complete the service.
Features
- UL Listed
- Die-cast aluminum head
- Steel filter bowl assembly
- Powder coated components
- Locking ring collar - no V-clamps
- 1.5” NPT inlet/outlet ports
- Designed to withstand 150 PSI maximum pressure at 240°F
- Maximum operating temperature 170°F
- Manual drain valve
- Manual vent valve
- Sight Glass
Specifications
- Fuel Ports: 1 1/2 in. NPT
- Material: Aluminum Head, Steel Bowl
- Max Working Pressure: 150 PSI @ 240°F (10.3 BAR @ 115°C)
- Clean Pressure Drop: 1 PSI (0.07 BAR)
- Ambient Temp Range: -40°F to +255°F (-40°C to +124°C)
- Max Fuel Temperature: 190°F (88°C)