Graco 1040 FDA-Compliant 1 in. Double Diaphragm Sanitary Pumps w/ SST/PTFE O-Rings, PTFE Diaphragm & Balls

Graco 1040 FDA-Compliant 1 in. Double Diaphragm Sanitary Pump with flow rates up to 41 gpm - ideal for food-related applications. Pump has 1 in. Tri Clamp fittings on both the inlet and outlet for ease of installation and cleaning.

Looking for replacement parts? Click here!

Applications

• Evacuation of food process mixing kettles
• Transferring from original container to mixing tanks
• High volume evacuation of liquid concentrates from shipping tankers to holding vessels
• Repackaging of fluids from original container to smaller receptacles
• Pumping lotions for the pharmaceutical industry

Features

• 1 in (25.4 mm) Tri-clamp connection on inlet & outlet
• All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• Air pressure operating range of 20-120 psi (1.4-8 bar, 0.14-0.8 MPa)
• Maximum free-flow delivery of 40 gpm (151 lpm)
• All Graco diaphragm pumps offer flow rates up to 25% greater than many competitive pumps with PTFE diaphragms
• Wide range of food-grade elastomers available including Santoprene, Nitrile Rubber, Viton and PTFE
• O-Ring Material: PTFE

Specifications

• Air Exhaust Port Size: 3/4 in (19.05 mm)
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size: 1/2 in (12.70 mm)
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT
• Application: Sanitary
• Ball Material: PTFE
• Center Section Material: Stainless Steel
• Compatible Material: Edible Oil, Food and Personal Care
• Compressor Required: Yes
• Configuration Code: 1040FG-PS01AS13SSPTPTPT21
• Connection Type: Tri-Clamp
• Diaphragm Material: PTFE/Santoprene 2-Piece
• Fluid Passage Size: 1 in (25.4 mm)
• Fluid Section Material: 316 Stainless Steel
• For Use With: Food and Personal Care
• Hazardous Location Approval: ATEX, IECEx
• Manifold Configuration: End Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel
• Material Certification: EN 1024:2004 Type 2.1 (Standard)
• Maximum Air Consumption: 50 SCFM (1416 L/min)
• Maximum Air Pressure: 120 psi (0.83 MPa / 828 kPa)
• Maximum Cycle Rate: 256 CPM (4.27 Hz)
• Maximum Flow Rate: 41 GPM (155 L/min)
• Maximum Fluid Operating Temperature: 180 °F (82 °C)
• Maximum Fluid Pressure: 120 psi (0.83 MPa / 828 kPa)
• Maximum Solid Size: 0.125 in (3.18 mm)
• Minimum Fluid Operating Temperature: -40 °F (-40 °C)
• Model: SaniForce
• Overall Height: 16.1 in (409 mm)
• Power Source: Pneumatic
• Pump Ratio: 1:1
• Pump Type: FDA Grade
• Seat Material: 316 Stainless Steel
• Series: 1040 FG
• Standards Met: FDA Compliant Materials, EC 1935/2004
• Surface Finish: 125 Ra (3.18 µm)
• Tri-Clamp Connection Size: 1.5 in (38.10 mm)
• Type: Pneumatic Diaphragm Pump
• Weight: 55 lb (24.95 kg)

Downloads