Flux Pumps MINIFLUX Sanitary Container Pump, 63 GPM w/ F457 Electric Motor

Description

The horizontally installed, compact MINIFLUX Sanitary IBC container pump was designed for emptying IBCs and other containers with a bottom outlet. It is intended as an alternative to vertical drum pumps for cases where containers can only be accessed from above with great difficulty if at all. It is also ideal if the medium's or liquid's natural outlet via the outlet tap does not provide sufficient pumping pressure for filling at speed or transferring to a container at a higher level, for example. The MINIFLUX is driven by a commutator motor, compressed air motor or brushless motor.

The MINIFLUX Sanitary is also designed for use in the hygiene sector. It is FDA-compliant as well as FOOD-compliant according to EC 1935/2004 and can be dismantled in a matter of seconds without any tools.

Included is the F457 electric motor for 120V, 60Hz, 1ph operation.

Please call a JME Sales Specialist at 800-333-3331 if a different motor than the F457 is required.

Other FLUX motors can be supplied (sold separately): (Electric) FEM 4070, F 457 EL, F 458/ F 458 EL, F 460 Ex/ F 460 Ex EL and F 458-1/ F 460-1 Ex & (Electric - Brushless) FBM 4000 Ex & (Electric 3 Phase Gear) F 414 & (Air Operated) F 416 Ex/F416-1 Ex/ F 416-2 Ex.

Included is also a support cable. Used to support the pump and motor from the IBC / tote cage.

Features

• Used to transfer liquids out of IBC / totes and other containers with outlet connection at the bottom
• Particularly suitable for hygiene applications
• For horizontal use / dry installation outside the container - liquid only comes into contact with the inside of the pump.
• Designed with minimal dead space and easy to clean
• No greased seals - no risk of grease being carried over into the liquid
• Can be disassembled without tools
• Emptying IBCs with residual quantity of less than 1 % (depending on the inclination angle)
• Can be combined with electric commutator motors, electric brushless motors and air operated motors
• Suitable for continuous operation, dry running to a limited extent

Specifications

• Delivery rate max.: 63 gpm (240 l/min) (*)
• Delivery head max.: 42 ft (13 mWs) (*)
• Viscosity max.: 800 cps (when used with the F457 motor)
• Inlet connection Clamp: 2 in. (optional S60x6 adapter – sold separately)
• Discharge connection Clamp: 1-1/2 in.
• Outer tube: Stainless steel (316 Ti)
• Lip seal: PTFE
• Seals: FKM / EPDM
• Rotor: ETFE
• Total length: 199.5 mm
• Weight: 4 Lbs (1.8 kg)
• Media/ambient temperature max.: Max. 212 deg F (100 deg C)

*As tested with water at 68°F at pump outlet with full, open discharge (+/- 10%); Max head measured with closed outlet. Performance will vary based on type of liquid(s) being transferred. Adding any length of hose will reduce the flow. Liquids with higher viscosity than water ( 1 cps) will result in lower flows. If using hose longer than 10 ft or 3 meters on the pump discharge, contact a JME Sales Specialist at 800-333-3331.

Materials

• Low viscosity foods
• Juices
• Low viscosity oils
• Vegetable stock
• Low viscosity cosmetic products
• Make-up remover
• Facial toner

Downloads

Specification Sheet (PDF Download)

Data Sheet (PDF Download)

Product Literature (PDF Download)