Flowline Switch-Tek® LO10 Optical Leak Detection Short Switch, 3/4 in. NPT

Flowline's Switch-Tek® LO10 general purpose optic leak switch provides liquid leak detection in and around secondary containment sumps, tanks and piping systems with a 1A relay output. For use with Sulfuric Acid and Sodium Hypochlorite. This leak detection switch is made of polypropylene (PP) and is submersible, it is universally mounted through the containment wall or within the interstitial space and then connected to a PLC or relay controller.

Features

• 60VA SPST relay selectable NO or NC via power supply wiring polarity
• Rugged polypropylene sensor and cable for corrosive liquids
• Sensor may be located up to 1000 ft. from a Flowline relay controller
• Fail-safe leak sensor inverts "wet" to alert user for maintenance
• Submersible sensor and cable designed for insertion within a secondary containment wall
• Requires only a small amount of liquid to detect the presence of a leak

Specifications

• Single point switches
• Optic liquid leak detection switch
• 3/4 in. NPT process mount
• Accuracy: ± 0.039 in. (1 mm) in water
• Repeatability: ±0.019 in. ( 0.5 mm) in water
• Supply voltage: 12-36V DC
• Consumption: 25 mA max.
• Contact type: (1) SPST relay
• Contact rating: 60VA, 1A max.
• Contact output: Selectable NO/NC
• Process temperature: -40° to 176° F (-40° to 80° C)
• Pressure: 150 PSI ( 10 Bar) at 77° F
• Sensor rating: NEMA 6 (IP68)
• Sensor material: PP (polypropylene)
• Polypropylene cable jack
• Cable: 10 ft. (3 m) 4-conductor, shielded # 22 AWG
• General purpose classification
• Sensor dimensions: 3 in. (76mm) L x 0.7 in. (19 mm) W with 10 ft. (3m) L cable
• Compliance: CE

Downloads

Datasheet (PDF Download)

Brochure (PDF Download)

Manual (PDF Download)