Flowline's general purpose submersible pressure level transmitter provides continuous level measurement up to 46 ft. (14 m) water column with a 4-20mA signal output. This liquid level sensor is for dirty, coating or slurry type liquids, examples include pump lift stations and waste sumps.
Features
- Rugged clog resistant diaphragm with heavy duty protection shield
- Strong cable design with maintenance free breather tube and vent filter
- Corrosion resistant 316 Stainless Steel body and shield with polyurethane cable
- Temperature compensation, lightning and surge protection for reliable measurement
- Simple installation via suspended cable
- Fixed span does not require any calibration
- Connects directly to PLC, SCADA or display
- Ideal for use with submersible pumps
Specifications
- Single point switches
- Range: 0 to 10 PSI (0.69 bar) @ 23' ft. (0 to 7 m) wc
- ±0.25% full scale
- Sensor thread: 1/2 in. NPT
- Configuration: None, fixed span
- Supply voltage: 13 to 0V DC
- Loop resist: 850 Ohms @ 30V DC
- Signal output: 4-20 mA, two-wire
- 40 ft. (12.2 m) polyurethane cable with polyethylene jacket
- 2-conductor, shielded cable with vent tube
- Proof Pressure: 2x full scale
- Process temperature: 0° to 200° F (-18° to 93°C)
- Temp Comp.: 0° to 180° F (-18° to 82°C) li>
- Sensor material: 316 Stainless steel and nitrile rubber
- General Purpose classification
- Sensor Dimensions: 7.98 in. ( 202.8 mm) L x 1.5 in. (38.1 mm) dia. X 2.19in. (55.8 mm) W with 40 ft. L cable
- Sensor Weight: 4.3 lbs. (2.0 kg)
- Compliance: CE
