Dixon Breaking Bolt Series Stainless Steel FNPT x FNPT Safety Break-Away Coupling

SKU:
Please choose an option below
Manufacturer:
Dixon
Product Type:
Repairable
Weight:
7.00 LBS
$1,395.01 - $14,677.62
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added

Coupling is designed to minimize spillage and damage associated with drive away and pull away incidents. Typically used for loading racks, these couplings are also suitable for LP Gas service.

The safety break-away valve consists of two halves, each with a valve that has an O-ring seal. When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment. Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces.

Features

  • Designed to be installed between a fixed point (pipe, pump, manifold) and a hose
  • Coupling automatically senses an excessive load, closes the valves and disconnects
  • High flow rate / low pressure drop

Specifications

  • Size: 2 - 6 in.
  • Max Working Pressure: 360 PSI
  • Material: Stainless Steel
  • Seal: FKM
  Size  
  Flow Rate  
  Length  
  Width  
2 in.
200 GPM
7 in.
4.5 in.
3 in.
650 GPM
11 in.
6.8 in.
4 in.
800 GPM
12 in.
8.3 in.
5 in.
1100 GPM
14 in.
10.6 in.
6 in.
1500 GPM
16 in.
12 in.