Filter system is designed for use on AC or DC transfer pumps with flow rates up to 25 GPM. The filter system contains a 10 micron particulate removal and water absorption filter for Biodiesel up to B100 and a 3/4 in. inlet and outlet filter head with pipe nipple.
Filter is also compatible with gasoline, diesel, ultra-low sulfur diesel (ULSD), and ethanol blends up to 15%. This Hydroglass filter removes common contaminants such as dirt, dust, and rust while absorbing any water that may be present in your fuel. The super-absorbent media absorbs water while allowing fuel to pass through the filter. When the media swells, the flow is restricted, telling you that the filter needs to be changed. The spin-on design makes changing out your filter quicker and easier than ever. Made in the USA.
Replacement Filter: CIM260BHG10 (70236)
Applications
- Aboveground storage tanks
- Transfer tanks
- Day-use tanks
- Gravity flow applications
- Transfer pumps
- Fuel dispensers
- Commercial fueling pumps
- Commercial, high flow, and polishing applications
- Use with gasoline, diesel, biodiesel up to B100, ultra-low sulfur diesel (ULSD), and ethanol blends up to 15%
Features
- Hydroglass filter removes particulates such as dirt, dust, and rust and absorbs water while allowing fuel to pass through the filter
- 25 GPM max flow rate
- 50 PSI maximum working pressure
- Pre-lubed gasket
- UL listed
- 10 micron, up to 25 GPM flow, 3 11/16" diameter x 8.75" length with a 1"-12 nose thread
Filter Adapter Guide
Filter Adapter Guide (PDF Download)