Balcrank CenterFlo CF15 Polypropylene Dual Fluid Inlet Diaphragm Mixing Pumps 14 GPM

SKU:
BC1120028
Manufacturer:
Material:
Polypropylene
Flow-Rate:
14 GPM
Weight:
7.75 LBS

As Low As:

$402.54
Balcrank CenterFlo CF15 Polypropylene Dual Fluid Inlet Diaphragm Mixing Pumps 14 GPM

Balcrank CenterFlo CF15 Polypropylene Dual Fluid Inlet Diaphragm Mixing Pumps 14 GPM

SKU:
BC1120028
Manufacturer:
Material:
Polypropylene
Flow-Rate:
14 GPM
Weight:
7.75 LBS

As Low As:

$402.54

New patented technology CenterFlo pumps feature reversed air/fluid design compared to conventional diaphragm pumps. Fluid path flows through the center of the pump with the air motor to the outside allowing improved suction and performance, less air consumption with less pulsation throughout the performance curve.

Features

  • Dual inlet pumps for 1:1 proportion mixing of fluids with similar viscosity
  • Superior performance against back pressure, nominal loss of flow and pressure capacity, under real application conditions is minimized
  • Significant dry suction lift, eliminate self-priming issues when pumping from drums or tall tanks
  • Dependable lube-free directional pivot air valve: starts-up every time
  • Tolerant of oil, moisture and dirt, non-icing, no air leaks when pump is stalled against head pressure of the system
  • Reduced air consumption per gallon pumped, saves energy, and avoids the need to use a larger compressor
  • Reduced pulsation gives greater measurement accuracy and less splashing during dispense
  • In-line servicing of air valve, diaphragms, and ball valves, without disconnecting from the fluid distribution line
  • Compact design allows this pump to fit in small spaces
  • Recommended fluids: Anti-freeze (Glycol) and windshield wash solution

Specifications

  • Air inlet: 3/8" NPSM (F)
  • Fluid inlet: 2-3/8" NPT (F) & flange
  • Fluid outlet: 1/2" NPT (F) & flange
  • Max. free flow: 14 G/M (50 L/M)
  • Air pressure range: 45 ? 100 PSI (3 ? 7 bar)
  • Max. solid suspension: 1/8" (3 mm)
  • Wetted materials: PTFE (Teflon®), Viton, Stainless Steel, Acetal, Hytrel®
  • Note: Both fluids and their resulting solution must be compatible with the pump wetted materials