AW-Lake M5A6HL88 1 1/4 in. - 2 in. Port 1 1/2 in. NPTF Flow Rate Transmitter - Aluminum, 10 to 100 GPM

AW-Lake M5A6HL88 1 1/4 in. - 2 in. Port 1 1/2 in. NPTF Flow Rate Transmitter - Aluminum, 10 to 100 GPM

The Flow Rate Transmitter is ideal for batching, industrial process control, mobile hydraulic equipment and computer / PLC controlled hydraulic system monitoring applications. It is designed without delicate internal components to break, abrade, or corrode. The weather tight construction includes a rugged cast aluminum enclosure built to NEMA 4X standard for installation outdoors. This variable area flow meter is used to measure air, gas, oil, and water. The transmitter provides a visual indication of flow rate that matches the transmitted output for direct reading.

Features

• Field Adjustable Alarm Setting: Only an allen wrench is required to change the flow alarm setting.
• Weather-Tight Construction: Rugged cast aluminum NEMA type 4X enclosure allows installation outdoors and in environments where liquid tight seals are required.
• Simple On/Off Logic: Positive alarm points using dry-contact, SPDT switches, reduce the complexity found in standard rotameter OFF/ON/OFF circuits.
• Pre-Wired with Cable Disconnect: The standard Hirschmann interconnection provides easy installation and maintenance of the Flow Alarm and the system it is a part of.
• Economical Protection: This monitor rapidly pays for itself as it “sounds the alarm” on incorrect pneumatic, lubrication or cooling volumes, protecting expensive equipment and reducing downtime.

Specifications

• Measuring Accuracy: ±2.0% of full scale for oil and water
• Repeatability: ±1% of full scale
• Maximum Operating Pressure: 3500 PSIG (240 Bar)
• Maximum Operating Temperature: 185°F (85°C)
• Standard Calibration Fluids: Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
• Filtration Requirements: 74 micron filter or 200 mesh screen minimum
• Viscosity: Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory
• Casing & End Ports: Anodized Aluminum
• Seals: Nitrile, Optional EPR, FKM, or FFKM
• Transfer Magnet: PTFE coated Alnico
• All Other Internal Parts: Stainless Steel
• Port/Line Size Range: 1 1/4 in. - 2 in.
• Material: Aluminum
• Fluid Media: Oil (0.873 Specific Gravity)
• Thread Type: 1 1/2 in. NPTF, Dry Seal
• Flow Range: 10 to 100 GPM
• Flow Direction: Standard Flow, Uni-directional

Downloads

Product Manual (PDF Download)

Specifications Sheet (PDF Download)