ARO 3:1 Ratio High Pressure 1 in. NPTF Aluminum Air Diaphragm Pump w/ PTFE Diaphragms, Stainless Steel Balls & Seats

ARO's pneumatic 3:1 ratio, high pressure diaphragm pumps provide effective flow rates up to 24 GPM at pressures up to 300 PSI. This pump can produce up to 300 PSI, at about half the flow rate of a standard diaphragm pump by utilizing two power pistons that drive the fluid handling diaphragms. The compact size and footprint makes this a smart choice for a wide variety of markets and OEM's. This pump is useful for feeding filter presses, the transfer of paint, recirculation and high solid coatings, inks, adhesives, filled material, drilling grout, caulking, solvent reclamation and resins.

Model #: PH10A-ASS-SST

Features

• Generates nearly 300 PSI on standard 100 PSI shop air
• Stall-Free
• Exceptional material compatibility
• Easy to maintain
• Ideal transfer of paint recirculation and high solid coatings, inks, adhesives, filled material, drilling grout, caulking, solvent reclamation and resins

Specifications

• Ratio: 1:1
• Maximum Flow: 26 GPM (98.4 LPM) flooded inlet, 15 GPM (45.6 LPM) at 125 PSI back pressure
• Displacement Per Cycle: 0.06 Gal (0.23 L)
• Air Inlet: 3/8" NPTF
• Fluid Inlet/Outlet: 1" NPTF
• Max Operating Pressure: 100 PSI (6.9 BAR)
• Suspended Solids Max Dia.: 1/8" (3.2 mm)
• Max Dry Suction Lift: 5 - 6 Ft. (1.5 - 1.8 m)
• Sound Level (70 PSI, 60 Cycles/Min): 84.5 db(A)
• Center Section: Aluminum
• Wetted Parts: Stainless steel
• Hardware: Stainless steel
• Seat / Ball Material: 316 Stainless steel
• Diaphragm Material: PTFE (Teflon)

Downloads