Tudertechnica Tufluor® Black PTFE Chem Full Conductive 2 in. 250 PSI Chemical Suction & Delivery Hose - Hose Only

2 in.
Per ft.
250 PSI
Product Type:
Hose Only - No Ends
1.39 LBS
Made-To-Order (MTO) item is non-returnable/non-refundable/non-cancellable unless there is a defect or warranty issue.
  • Buy 10 or more and get 5% off
Adding to cart… The item has been added

Tudertechnica's Tufluor® PTFE Chem Full Conductive is a suction and delivery hose with a smooth black Teflon™ PTFE (conductive) inner tube. Designed according to EN 12115 standards for chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Tested and certified hose by BUREAU VERITAS for use in Atex area (Ex-Zone). Manufactured according to GMP (Reg. (CE) 2023/2006). Not intended for use as an implant material. Not suitable for blood or human fluids.

Service Temperature Range: -40°F to 302°F (-40°C to +150°C)

Notes: Hose only (no ends). Hose is priced by the foot. Sold at a minimum quantity of 5.


  • Light and flexible
  • Reinforced with synthetic plies
  • Wire discharges static electricity
  • Smooth black Teflon™ PTFE inner tube - phthalates free
  • Abrasion, aging and ozone resistant cover


  • Series: Tufluor® PTFE Chem - Full Conductive
  • Type: Chemical/Solvent Suction & Delivery Hose
  • Inside Diameter (ID): 2 in. (50 mm.)
  • Outside Diameter (OD): 2.60 in. (66 mm.)
  • Hose Ends: None - Hose Only
  • Length: Per ft.
  • Inner Tube: Teflon™ PTFE*, Black, Conductive, Smooth, Phthalates Free
  • Outer Cover: Smooth, EPDM, Black, Conductive, Cloth Finish
  • Reinforcement: Synthetic Plies, Stainless Steel Wire Helices, A/S Wire to Discharge Static Electricity
  • Bend Radius: 12.99 in. (330 mm.)
  • Vacuum: 13 PSI (0.9 bar)
  • Working Pressure: 250 PSI (16 bar)
  • Burst Pressure: 1,000 PSI (64 bar)
  • Operating Temperature Range: -40°F to 302°F (-40°C to +150°C)
  • Fluid Compatibility: Chemicals and Solvents, Except for Chlorine Trifluoride, Chlorine and Fluorine Gas, Oxygen Difluoride, Phosgene and Molten Alkalis
  • Electrical Properties : Type Ω/T According to Norm EN 12115 (R<10⁶ Ω, R<10⁹ Ω Through the Hose Wall)
  • Norm: EN12115 - TRbF 131/2
  • Weight: 1.39 lbs./ft. (2.08 kg/m.)

*Note: Teflon™ PTFE is a polymer with excellent resistance to high temperature, mechanical stress and oxidation. It complies with FDA 21 CFR 177.1550; DM 21/03/1973 and subsequent amendments; USP class VI main requirements; ISO 10993 - 5:2009, 11:2006; REGULATION 1935/2004/CE; REGULATION 10/2011/CE; REGULATION 1245/2020/CE; 3-A RPSCQC for (62-02) Hose Assemblies. Tested in compliance with 1907/2006/CE (REACH).


Data Sheet (PDF Download)

Chemical Chart (PDF Download)

Cleaning Chart (PDF Download)

Cleaning Guidelines (PDF Download)