Teledyne iTrans 2 Infrared Gas Detector, Explosion proof w/ On-Board Relays - Carbon Monoxide (O2) 0-30% Vol

Description

The iTrans 2 Infrared Gas Sensor employs an intelligent electronics platform to provide one or two points of detection from a single head. With the optional HART Communication Protocol, the iTrans 2 offers remote diagnostics, set-up or calibration. The iTrans 2 is able to detect any combination of gases for a specific environment and boasts a wide range of safety features including automatic sensor recognition, access code security and zero and cal fault protection

Features

• The optional HART communication protocol for the iTrans 2 offers remote diagnostics, set-up or calibration by super-imposing a digital current across the industry standard 4-20mA analog line
• Wide sensor offering including electrochemical, catalytic bead and infrared sensors are all supported for the iTrans 2
• An optional stainless steel enclosure is available for use in corrosive environments
• Dual-channel, split-screen LED display for optimal visibility in dark places
• A simple magnetic wand can be used for full transmitter configuration and calibration without opening the unit’s explosion-proof housing
• Up to two gases can be detected and displayed on the iTrans 2. Both sensors may be mounted directly to the transmitter or mounted remotely
• Smart sensors come pre-calibrated and automatically send sensor information, such as sensor life, to the transmitter. A sensor life indicator is displayed immediately after each calibration
• Approvals: NRTL/c and CSA, ATEX, IECEx,China Ex

Specifications

• Brand: Teledyne
• Series: iTrans2
• Part Number: iTrans2-1A410
• Sensor: Electrochemical
• Material (Housing): Epoxy Coated Aluminium
• Certifications / Approvals: - CCSAUS*: Class I, Div 1, Groups B, C, D., Ex d IIB + H2 T5, AEx d llB + H2T5, Class I, Div 2, Groups A, B, C, D.; ATEX and IECEx: II 2G - Ex db IIB + H2 T5 Gb; NEPSI: GYB15.1621X - Ex d IIB + H2 T5 Gb GB15322.1-2003 Fire protection; INMETRO: Ex db IIB+H2 T5 Gb
• Display: Dual-channel split-screen LED display
• Gas: O2 (0-30%vol)***
• Ingress Protection: NEMA 4X, IP66
• Alarm Relays: 3 alarm relays
• Input Voltage: 24V DC
• Operating Humidity Range: 10-90% RH (non-condensing)
• Output Signal: + RS-485 Modbus (9600 baud)
• Relay Type: Modbus On-Board Relays
• Response Time: T50: < 10 seconds (catalytic methane - T90: <30 Seconds)
• Temperature Range: -40°C to +75°C (-40°F to +167°F)
• Type: Explosion proof/ On-Board

Applications

• Oil &Gas Industry
• Offshore Drilling
• Utilities and Power
• Petrochemical Industry
• Municipal Water and Waste Treatment
• Food & Beverage Production

Downloads

Specification Sheet (PDF Download)

Product Manual (PDF Download)

Product Literature (PDF Download)