Roper 3600 Series heavy duty pumps are general purpose pumps for mixing, blending, recirculating, fixed and mobile transfer. These pumps operate smoothly and with equal efficiency in either direction of rotation. They effectively handle heavy, viscous materials such as asphalt, molasses, roofing compounds, and printing inks, as well as fuel oils, gasolines, and similar thin liquids.
In the event of overpressure situations, the adjustable relief valve on the RP3611GHBFRVZ protects personnel and equipment by returning liquids to the suction side of the pump. Various spring sizes can be specified to handle a wide range of operating conditions. Roper Pumps' inverted poppet relief valve is designed without close fitting guides that can clog and cause excessive pressures when the valve does not open freely. The valve will provide protection in only one direction of rotation. However, it can be positioned easily to either side of the pump to accommodate flow direction.
Features
- Quiet-Running helical gears
- Heat treated cast-iron pumping gears are accurately machined for quiet, efficient operation and long life.
- The pumping gears are keyed to their shafts with a sliding fit and are easily replaced
- Accurate machining ensures proper meshing and reduces friction and vibration
- Precision-Ground shafts
- The steel shafts are induction-hardened in the bearing and sealing areas and are precision ground to exacting standards for maximum life
- Hardened stainless steel shafts available
- Long-Lasting Bearing Surfaces
- Bearings are special wear-resistant, high-lead bronze.
- Four heavy duty sleeve bearings provide positive support to pumping gears and ensure long, efficient service.
- Bearing grooves allow circulation of the liquid being pumped for lubrication & control of bearing temperature.
- Outboard drive shaft bearing supports external radial loads and absorbs axial thrust loads.
- Rugged Housings
- Standard castings are cast iron
- Precise manufacturing tolerances provide minimum clearances for maximum pumping efficiency.
- Large, hardened steel dowel pins ensure positive alignment between the faceplate, case, and backplate.
Specifications
- Port location: Right Angle Ports
- Seal option: Packing
- Size: 11 - 11 Gal/100 Rev (41.6 l/100 Rev)
- Configuration: Flanged ports with outboard bearing, relief valve and gear reducer
- Gasket material: Fiber (for use up to 212° F/100° C)
Downloads
Product Brochure (PDF Download)
