RDS Manufacturing 60 Gallon Rectangular Aluminum Diesel Auxiliary Tank

RDS Manufacturing 60 Gallon Rectangular Aluminum Diesel Auxiliary Tanks are made in the USA and are DOT approved. Each tank includes a manual sight gauge, baffles to reduce sloshing and drain fittings.

Note: Includes a Diesel Install Kit that easily connects the RDS tank to the OEM fuel tank. Not intended to be used with gasoline.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

• Gravity feed diesel to increase driving range
• No rust 0.125 in. heavy-duty aluminum construction
• Fully welded seams
• 100% pressure tested
• Built-in baffles to reduce sloshing
• Vehicle rollover safety valve (vent)
• Includes 3/8 in. NPTF(F) drain plug
• Manual sight fuel gauge included

Specifications

• Type: Auxiliary Tank
• Shape: Rectangular
• Material: Aluminum
• Finish: Diamond Plated
• Capacity: 60 Gallon
• Empty Weight: 61 lbs.
• Dimensions: 55 in. L x 20 in. W x 12 3/4 in. H

• Mounting tabs extend out 1 in. - adds 2 in. to total length and 1 in. to total width
• Add 2 1/2 in. for fill cap height
• Always measure the truck's bed for clearance at corners, wheel wells, etc.

Downloads

Installation Instructions (PDF Download)

RDS DOT Permit (PDF Download)