PETOL™ Gearench Surgrip Friction Vise

Description

The PETOLTM SURGRIPTM Friction Vises were designed for holding downhole pump and other precision components during makeup and breakout operations where marking is prohibited. The vises utilize precision aluminum bushings that can be quickly and easily installed in the jaws. The bushings are match-bored to a specific diameter. Additional diameters will require additional bushings. The vises use high strength, heat treated alloy steels for other components for rugged, dependable service and high-quality materials throughout for long life with the toughest jobs. The ZV35-54 Friction Vise uses aluminum bushings to work individual diameters from 0.625 to 3.250 inches. The bushings and bushing keys may be removed to work 3.500-inch diameter. The vise incorporates a 4-inch clamping nut to tighten the vise. The vise is rated up to 7,700 foot-pounds of torque depending on diameter The ZV55-54 Friction Vise uses aluminum bushings to work individual diameters from 3.000 to 5.250 inches. The bushings and bushing keys may be removed to work 5.500-inch diameter. The vise may be optionally equipped with ZUV55-35A adapter bushings to use ZUV35 bushings for smaller diameters. The vise incorporates a 4-inch clamping nut to tighten the vise. The vise is rated up to 27,700 foot-pounds of torque depending on diameter. Note: Vise plate, bolts, nuts, and bushings are sold separately.

Features

• Essential companion tool for PETOL™ Hydraulic Friction Breakout Units
• Provide a superior non-crushing and non-marring friction grip
• Interchangeable aluminum bushings, held in place by spring loaded plungers, meet specific O.D. requirements
• G4ZV55-54 vise can be fitted with special adaptor bushings enabling it to work the smaller O.D. range of the ZV35-54 vise

Downloads

Product Manual (PDF Download)