OPW 66V Series Female Breakaway Valve Description

Body: Aluminum
Middle Coupling: Die-cast zinc
Disc and Seals: Viton&reg;
Springs: Zinc-plated steel
Static Seals: Nitrile Rubber
Dust Seal: Neoprene

The OPW 66 Breakaway Valve is designed to protect your fuel dispensing equipment and minimize environmental risk. Installed directly on fuel dispensing hoses, it automatically separates when a specific pull force is applied to prevent damage during drive-offs or accidental tension. When separation occurs, the dual internal valves close instantly, stopping fuel flow from both ends and limiting spillage. This safety-first design helps safeguard your facility and equipment with minimal interruption.

Note: The 66V-1" model requires installation with a minimum 12" hose length.

Features

Pull force - the 66V-0300 will break away with a pull force less than 300 lbs
Certainty of operation - designed to be replaced after separation, instead of reassembled, to protect against reassembly errors
Unique double-poppet design - features low pressure drop
Low pressure drop - the integral check valve design allows for minimal pressure drop for faster, high-volume fill-ups
Listed by Underwriters Laboratories, Inc
Design Working Pressure - OPW products are designed to work at 50 PSI (3.45 bar) maximum pressure