JME BadgerFlex 3/4 in. Fuel Dispensing Hose - Hose Only

3/4 in.
Per ft.
Product Type:
Hose Only - No Ends
0.47 LBS
Made-To-Order (MTO) item is non-returnable/non-refundable/non-cancellable unless there is a defect or warranty issue.
Adding to cart… The item has been added

JME's BadgerFlex Fuel Dispensing Hose is UL listed and suitable for transferring gasoline, diesel, ethanol blends (up to E10), and biodiesel blends (up to B5). Constructed with an inner tube made from nitrile rubber (NBR) and a chlorinated polyethylene (CPE) cover to protect the hose from external elements.

Notes: Hose only (no ends). Hose is priced by the foot. Available in lengths from 5 ft. up to 200 ft.


  • Nitrile rubber (NBR) inner tube provides excellent resistant to fuel and petroleum-based fluids
  • Chlorinated polyethylene (CPE) cover protects against external elements and prolongs the hose's lifespan
  • Reinforced with a single layer steel wire braid which provides electrical conductivity for static dissipation
  • Hose is manufactured and tested in accordance with the requirements of UL330


  • Series: BadgerFlex
  • Type: Fuel Dispensing Hose
  • Inside Diameter (ID): 3/4 in. (19 mm.) Nominal
  • Outside Diameter (OD): 1.13 in. (28.7 mm.) Nominal
  • Hose Ends: None - Hose Only
  • Length: Per ft.
  • Inner Tube: Nitrile Rubber (NBR)
  • Outer Cover: Chlorinated Polyethylene (CPE) - Black
  • Reinforcement: Single Layer, Steel Wire Braid (Electrically Conductive)
  • Minimum Bend Radius: 3.94 in. (100 mm.)
  • Maximum Working Pressure: 250 PSI (17.24 bar)
  • Minimum Burst Pressure: 1,000 PSI (68.95 bar)
  • Operating Temperature Range: -40°F to 158°F (-40°C to +70°C)
  • Fluid Compatibility: Gasoline, Diesel, Ethanol Blends (up to E10) and Biodiesel Blends (up to B5)
  • Compliance: UL Listed
  • Weight: 0.47 lbs./ft.


Product Drawing (PDF Download)