JME 80 Gallon Diesel Fuel Transfer Tank System - 12V DC Pump

This JME 80 gallon Diesel Fuel transfer tank system comes with everything you need to safely and cleanly transfer Diesel Fuel. Unit comes complete with a 12V DC pump, dispense hose and manual nozzle.

Call 1 (800) 333-3331 for pricing to add a four-way fork lift pallet, automatic nozzle and/or a fuel meter.

Diesel Fuel Only - Not for Gasoline.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

• Rhino Tuff Tanks 80 gallon lockable tank
• 12 volt 10 GPM transfer pump
• Suction tube and suction hose
• 12 ft. dispensing hose
• Manual dispensing nozzle
• Battery cable with alligator clamps
• Complete system, ready to dispense after filling with Diesel Fuel and connecting to 12V DC source
• Tank dimensions: 36" L x 36" W x 27" H
• Diesel Fuel Only - Not for Gasoline