Graco Husky 1050 1 in. Aluminum Air Diaphragm Pump w/ TPE Diaphragms, Acetal Balls & Polyester Elastomer Seats

Graco's Husky 1050 aluminum 1 in. air-operated diaphragm pump for the transfer of Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, and Water (Wastewater). The pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance.

Graco recommends the installation of a fluid pressure relief valve at the pump outlet to prevent over-pressurization and rupture of the pump or hose. Use Fluid Pressure Relief Kit, part number GR238428, for the Graco Husky 1050 aluminum Diaphragm Pumps.

Features

• Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime
• Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover
• One-Piece Center Section - Eliminates air leaks for more efficient operation
• Four Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operation
• Multiple Ports - Increased number of ports for installation flexibility
• Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
• 30% more efficient than the market leader
• 20% increase in fluid flow compared to the Husky 1040

Specifications

• Model: Husky
• Series: 1050
• Type: Pneumatic Diaphragm Pump
• Application Industrial
• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
• Air Exhaust Port Size: 3/4 in. Female NPT
• Air Inlet Size: 1/2 in. Female NPT
• Ball Material: Acetal
• Center Section Material: Aluminum
• Connection Type: Threaded
• Diaphragm Material: TPE
• Fluid Inlet Size: 1 in. Female NPT
• Fluid Outlet Size: 1 in. Female NPT
• Fluid Section Material: Aluminum
• Manifold Configuration: Center Port, End Port
• Material: Aluminum
• Maximum Air Consumption: 67 SCFM
• Maximum Air Pressure: 0.86 MPa
• Maximum Air Pressure: 125 PSI
• Maximum Cycle Rate: 280 CPM
• Maximum Flow Rate: 50 GPM
• Maximum Fluid Pressure: 0.86 MPa
• Maximum Fluid Pressure: 125 PSI
• Maximum Operating Temperature: 150°F
• Maximum Solid Size: 0.125 in.
• Overall Height: (in) 15.9 in.
• Power Source: Air
• Seat Material: Polyester Elastomer
• Wetted Material: Aluminum, Polyester Elastomer, Acetal, TPE
• Weight: 27 lbs.

Downloads

Husky 1050 Operation Manual (PDF Download)

Husky 1050 Repair/Parts Manual (PDF Download)