GPI G2S Series 2 in. Stainless Steel Tri-Clover Meter w/ 2 1/2 in. Clamp Ends - Gallons

SKU:
GPIG2S20T09GMB
Manufacturer:
Size:
2 in.
Flow-Rate:
20 to 200 GPM
Type:
Reads Gallons
Weight:
3.00 LBS

As Low As:

$1,316.60
GPI G2S Series 2 in. Stainless Steel Tri-Clover Meter w/ 2 1/2 in. Clamp Ends - Gallons

GPI G2S Series 2 in. Stainless Steel Tri-Clover Meter w/ 2 1/2 in. Clamp Ends - Gallons

SKU:
GPIG2S20T09GMB
Manufacturer:
Size:
2 in.
Flow-Rate:
20 to 200 GPM
Type:
Reads Gallons
Weight:
3.00 LBS

As Low As:

$1,316.60

Looking for a Tri-Clover® stainless steel flow meter for food, beverage, or pharmaceutical? The GPI Tri-Clover® flowmeter family is the one for you. The lithium battery powered electronic display G2 Tri-Clover® flowmeters are calibrated to read in gallons and liters per minute with two totals in which case one is resettable and gives you a cumulative flow total. All the G2 flowmeters are intrinsically safe, cost effective liquid flowmeters.

Features

  • Stainless steel meters have excellent chemical compatibility
  • Modular design allows for use with Output Modules, Sensors and Remote Transmitters
  • Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate
  • Precision accuracy meter
  • Internal parts are simple to replace for easy maintenance
  • Powered by Lithium batteries for approximately 9,000 hours
  • Accessories easily upgrade meter

Specifications

  • Fitting Type: 2 1/2 in. Tri-Cover
  • Housing Material: 316 Stainless Steel
  • Meter Size 2 in.
  • Flow Rate: 20-200 GPM
  • Repeatability: ± 0.1%
  • Operating Temp. Range: -40°F to +250°F (-40°C to +121°C)
  • Operating Temp. Range w/Computer: +14°F to +140°F (-10°C to +60°C)
  • Typical K-Factor:
    • 2 in. Meter (S20T) 100
  • Wetted Materials:
    • Housing: 316 Stainless Steel
    • Bearings: Ceramic
    • Shaft: Tungsten Carbide
    • Rotor: PVDF
    • Rings: 316 Stainless Steel
  • Frequency Range:
    • 2 in. Meter (S20T) 33 - 330 Hz @ 20 - 200 GPM
  • Recommended Strainer Size:
    • 2 in. Meter (S20T) 28 mesh
  • Maximum Flow:
    • 2 in. Meter (S20T) 300 GPM (1136 LPM)