GlobalGear 1 1/2 in. NPT Cast Iron Process Gear Pump W/ Mechanical Seal, 15 GPM, 1800 RPM

Description

The GlobalGear Series from Ingersoll Rand is a top choice for industrial fluid transfer. These gear pumps are built to perform reliably and efficiently in tough conditions. Used by businesses worldwide, GlobalGear pumps are perfect for industries like chemical processing, oil and gas, heating, and manufacturing.

The GG Series pumps use the internal gear design pumping principle to perform the positive-displacement pumping action desired. Thus, the pump has only two moving parts, the rotor and the idler gear. Pumping action is based on a rotor, idler gear and crescent-shaped partition cast integral with the cover. Power applied to the rotor is transmitted to the idler gear with which it meshes. The space between the outside diameter of the idler and the inside diameter of the rotor is sealed by the crescent. As the pump starts, the teeth come out of mesh, increasing the volume. This creates a partial vacuum, drawing the liquid into the pump through the suction port. The liquid fills the spaces between the teeth of the idler and the rotor and is carried past the crescent partition through the pressure side of the pump. When the teeth mesh on the pressure side, the liquid is forced from the spaces and out through the discharge port. The materials furnished for each pump are selected to suit individual applications.

Note: Do not run pump dry

Features

• Dependable Performance: GlobalGear pumps are designed based on real customer feedback, tackling issues like seal leaks, downtime, and maintenance. With strong materials and advanced sealing options, these pumps are built to last.
• Built for the Future of Industrial Pumping: With over 20 years of proven success, the GlobalGear Series continues to evolve to meet the needs of modern industries. Whether you're transferring chemicals, oils, or other viscous fluids, these pumps deliver dependable, long-lasting performance.
• Better Performance: The stronger shafts and flexible designs make these pumps reliable in challenging conditions.
• Stronger Rotor and Idler Design: Made with high-strength ductile iron, these parts are built to last and perform in tough conditions.
• Tailored for Your Needs: Whether you need pumps for thick fluids, cold-start situations, or precise flow control, the GlobalGear Series offers the right pump for your business.
• Longer Bearing Life: The sealed bearings last longer and require no maintenance, reducing downtime.
• Efficient and Reliable: Advanced design features, like improved NPSHr and higher flow capacity, ensure these pumps deliver more with less energy.
• Faster Repairs: Inline seal access and modular parts make maintenance faster and easier than with traditional pumps.
• Easy Maintenance: The back pull-out design allows you to replace parts without disturbing the piping, reducing downtime. The seal replacement time is quick—just 40 minutes, compared to the 120 minutes needed for competitors' pumps.
• Reliable and Steady Flow: The internal gear design provides smooth, continuous flow, even with thick or heat-sensitive fluids. The advanced construction of the rotors and idlers reduces wear, ensuring longer pump life and lower maintenance costs.
• Built for Tough Conditions: Available in cast iron, stainless steel, or cast steel, these pumps are tough enough to handle abrasive, corrosive, or thick fluids.
• Flexible Design Options: The pumps come with multiple port configurations to suit your piping needs, whether side, angle, or side-top.
• Optimized Performance: The internal seal flush (API Plan 13) cools and protects the seal, helping it last longer. The low NPSHr (Net Positive Suction Head Required) reduces the risk of cavitation and improves efficiency, even at lower pressures.
• High Pressure and Temperature Handling: The GlobalGear Series can handle pressures up to 525 PSI (36 bar) and temperatures up to 600°F (315°C), making it ideal for high-demand applications.

Specifications

• Brand: GlobalGear
• Part Number: GG015IA0CL1AHIA000
• Model: GG015
• Size: 1 1/2 in.
• Port Type: NPT
• Material: Cast Iron
• Max RPM: 1800
• Flow-Rate: 15
• Flow (GPM @ RPM): 15 @ 1750 RPM
• Flow (m³/hr @ RPM): 3.4 @ 1750 RPM
• Differential Pressures: 200 PSI (13.8 bar)
• Max Temp: 600 °F (316 °C)
• Max Viscosity: 1,000,000 SSU (220,000 cSt)
• Ports : 90 Degree
• Relief Valve: None
• Sealing Method: Packing
• Seal Type: Ni-Resist Type 2 mechanical seal
• Seal Material: FKM/Carbon/SiC
• Bushing & Pin: Bronze idler & bracket
• Approvals / Certifications: ATEX

Downloads

Product Literature (PDF Download)

Product Manual (PDF Download)

Specification Sheet (PDF Download)