Franklin Fueling System's FE PETRO® 3/4 Hp fixed speed submersible pumps deliver consistent flow rates for low throughput fuels. With best-in-class flow rates and backed by a long history of dependability, FE PETRO® pumps are responsible for delivering fuel to thousands of customers around the globe, day in and day out. This Alcohol-Gas (AG) model is UL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline. Variable length range extends from 88 inches to 149 inches, fitting 94% of all known installations.
Notes: Riser not included - Please call 1-800-333-3331 for more Information. 4 in. riser pipe, if supplied locally, must be 4-1/2 in. OD by 3/16 in. WT tubing.
Features
- Active Air Eliminator: FE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping
- Safety and Ease of Maintenance: FE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products
- Simple Servicing: If ever required, the pump can be easily removed from the tank by unthreading three bolts - There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP
- Manual Pressure Relief: As a standard FE PETRO® feature, a vent screw is provided to bleed line pressure to zero when necessary. By turning this screw, product is diverted back to the tank, dropping line pressure to zero - This reduces fuel discharged into the sump manhole or dispenser pan during servicing, further protecting service technicians and the environment
- Outlast, Outperform with Franklin Electric Inside: FE PETRO® STPs are powered by the legendary Franklin Electric motor and built for long term performance - Franklin Electric powered submersible pumps provide maximum uptime and a proven track record in the fueling industry that spans more than four decades - They feature best-in-class flow rates and a long history of dependability
- Quality Certification: Franklin Fueling Systems is an ISO 9001 Certified Manufacturer
Specifications
General:- Model: STP75-VL2
- Description: 3/4 Hp fixed speed submersible turbine pump
- Model Length Range: 88 in. - 149 in.
- Check Valve: 2-3/4 in. Diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer
- Pressure Relief Valve: Available in four pressure relief settings, integral to check valve - Standard model relieves at 40 psi and resets above 35 psi
- Syphon: Venturi-type syphon primer supplied with every submersible - Syphon check valve and secondary syphon sold separately
- Air Eliminator: Every submersible includes a tank return path with one-way check valve to provide active air elimination
- Electrical Disconnect: Electrical yoke for positive contractor disconnect during service
- 3/4 Hp fixed speed, 3450 rpm, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection
- 3/4 Hp models have a max. pressure of 30 psi
- 3/4 Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power
- 3/4 Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 15 microfarad
- STP-SCI single-phase Smart Controllers and STP-CBS single-phase control boxes are available for 3/4 Hp pump control
- Max. motor draw: 7 Amps
- Max. liquid viscosity: 70 SSU at 60 °F (15 °C)
- Alcohol-Gas (AG) compatible STP models are UL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline
- 3/4 Hp fixed speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas, and jet fuels in a non-gelled pourable state
- All wetted elastomers are made of a high grade, fluorocarbon compound
- cULus Listed
- Consult factory for applicable approvals
Downloads
STP-IST Installation Guide (PDF Download)
Submersible Turbine Pumps Datasheet (PDF Download)
