EVSIS 30kW DC Level 3 Wall Mount EV Fast Charger, Single Port w/ CCS Connector

The EVSIS 30kW direct current (DC) electric vehicle (EV) fast charger is ideal for commercial, workplace, fleet, dealerships and public parking charging. Compact and wall mountable to reduce the complexity and cost of installation. DC charging can charge faster than standard AC charging stations due to their higher power. Compatible with Electric vehicles or electric vehicle supply equipment (EVSE) that are CCS-capable, using a Combined Charging System (CCS) 1 connector.

The EVSIS 30 kW is designed to work without the added cost of a charging network. Plug in and use RFID reader, Credit Card for use authentication. The EVSIS has Payter terminal hardware to accept credit card payments, the App would have to be set up with whatever software company the end user wants to use, allowing owners to select a private charging network or open the station publicly. The station will quickly charge vehicles whether or not it is connected to a network.

The DC Fast Charger is built to exceed IP 54 standards, protected against dust and water splashes, but they should not be mounted in places where they are constantly being barraged by water or in the comfort of a garage or covered parking. Charging time and miles of charge will vary depend on factors, such as type of car, stare of charge of the car battery, outside temperature. Example: most cars could charge from fairly empty to 80% full in approximately 2 to 3 hours.

Note: The DC Fast Charger requires input of 480V AC, 60Hz, max 33CA. Installation can be completed by most certified electricians.

Features

• Charges 4 times faster than Level 2 AC charging stations
• High energy efficiency
• Effortless charging
• Easy installation and minimal maintenance
• Fits all CCS vehicles
• Advance internal design creates airflow between power modules to solve heat generation problem
• Front and side doors can be opened for maintenance
• Wall mountable, improved mounting for ease of installation
• Ideal for Fleets, Private Parking Lots and Dealerships

Specifications

• Wall mount
• Output: 30 kW, 150~1,000 V DC max, 80 Amp current
• Connector: CCS
• Charging cable: 19.7 ft. (6 m)
• Display: 12.1 in. LCD display, Touch Screen
• Network interface: Ethernet, Cellular, WLAN
• Support language: English (Other languages available upon request)
• Includes 19.7 ft. cable
• Communication with EV: IEC 61851 PLC
• 1 Emergency stop button
• User authentication: ISO/IEC 14443 A/b Mifare RFID reader, Credit car reader
• Input: 480V ac 60Hz, max 33kCA
• UL rated
• Input/THD: <5%
• Power factor: >0.96- Full scale
• Charging mode: CC, CV
• Volt & Current accuracy: ±1.0%- full scale
• Isolation impedance: 10M ohm@1,000 Volts
• Operating Temperature: -22° F to 122°F (-30°C to 50°C)
• Humidity rating:< RH95%- non-condensing
• Communication protocol: OCPP1.6J (OCPP 2.0.1 will be supported in 2024)
• Safety protection: Over voltage, Over current, Short-circuit, Over temperature, Earth leakage, Surge protection, Contractor welding
• Cooling: Forced air
• Protection: IP54 ( NEMA 3R) rated
• Each unit is crate packaged for delivery
• Dimensions: 25.6 in. W x 12.8 in D x 24.5 in. H (650 mm W x 32.51 mm D x 622.4 mm H
• Weight 200 lbs. (91 kg)

Warranty

Limited 2 year warranty from date of 60 days after shipment of EVSE to the customer or the date of initial installation. Warranty covered parts:

• Circuit breaker
• CTRL board
• Digital meter
• PLC modem
• Relay
• Power module
• PC
• Coupler
• Payment terminal

Downloads

Specifications (PDF Download)