Dixon Wilkerson 3/8 in. B28 Standard Filter/Regulator with Metal Bowl & Sight Glass - Manual Drain

Dixon Wilkerson Standard Filter/Regulators (over-under units) are space savers and provide for installation in tight areas. One common inlet/outlet for both filter and regulator saves on piping costs.

Features

• 5-125 psig adjusting range for transparent bowl with guard
• 10-250 psig adjusting range for metal bowl with sight glass
• Self-relieving High Flow
• 5 micron element
• 6 oz. bowl
• Spring-loaded diaphragm
• To increase regulated pressure, pull adjusting knob and turn clockwise
• To reduce pressure, turn knob counter clockwise
• To lock knob, push down
• Two 1/4" gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges
• SCFM ratings at 100 psig inlet pressure
• Models supplied without gauge use a GC230 gauge
• Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
• Metal Bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)

Downloads