Dixon Wilkerson 3/4 in. L30 EconOmist Standard lubricator with Metal Bowl

3/4 in.
Product Type:
Metal Bowl
196 SCFM
6.20 LBS
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added

The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.


  • 26 oz. bowl
  • Transparent bowl: no drain
  • Metal bowl: manual brass petcock drain
  • Can be filled under pressure
  • The oil delivery rate will change automatically to deliver more oil during higher air flows and less oil for air flows lower than the one at which the setting was made


  • Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
  • Metal bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)
  • Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
  • Do not use synthetic oil or any oils containing additives or solvents
  • SCFM ratings at 120 psig inlet pressure