Dixon Wilkerson 1/2 in. L28 EconOmist Standard lubricator with Metal Bowl

The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.

Features

• 6.11 oz. bowl
• Manual drain
• Can be filled under pressure
• High flow capacity
• To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit
• If flow increases or decreases, the oil delivery rate will increase or decrease proportionally

Specifications

• Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
• Metal bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)
• Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
• Do not use synthetic oil or any oils containing additives or solvents
• SCFM ratings at 150 psig inlet pressure

Downloads

Wilkerson Cross Reference (PDF Download)

L28 Dixon Wilkerson Lubricator Installation & Maintenance Instructions (PDF Download)