Dixon Wilkerson 1/2 in. L26 EconOmist Standard lubricator with Metal Bowl

1/2 in.
Product Type:
Metal Bowl
128 SCFM
3.00 LBS
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added

The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.


  • 10 oz. bowl
  • Adjustable oil feed
  • quick-disconnect metal bowl guard with integral safety latch
  • Can be filled under pressure
  • Siphon tube filter provides clean lubricant downstream
  • The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for more and clockwise for less oil delivery
  • If flow increases or decreases, the oil delivery rate will increase or decrease proportionally


  • Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
  • Metal bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)
  • Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
  • Do not use synthetic oil or any oils containing additives or solvents
  • SCFM ratings at 150 psig inlet pressure