Dixon Wilkerson 1/2 in. L18 EconOmist Compact lubricator with Metal Bowl

1/2 in.
Product Type:
Metal Bowl
1.50 LBS
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added

The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently.


  • 4.09 oz. bowl
  • Manual drain
  • High flow capacity
  • Can be filled under pressure


  • Use any petroleum-base, non-detergent light weight oil (SAE 10/150SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil
  • Do not use synthetic oil or any oils containing additives or solvents
  • Transparent bowl maximum operating conditions: 150 psig (10.3 bar) and 32°F to 125°F (0°C to 52°C)
  • Metal bowl maximum operating conditions: 250 psig (17.2 bar) and 32°F to 150°F (0°C to 65.5°C)
  • To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit
  • Turn the sight dome, located on the top of the unit, counter clockwise to initiate oil delivery, the rate of oil delivery depends on air flow rate
  • If flow increases or decreases, the oil delivery rate will increase or decrease proportionally
  • Turning the sight dome clockwise will stop all oil delivery