Dixon VEP Series 3/4 in. Hydraulic Couplers - 5500 PSI

SKU:
DX6VEPF6
Manufacturer:
Size:
3/4 in.
Pressure:
5500 PSI
Weight:
1.75 LBS

As Low As:

$109.18
Dixon VEP Series 3/4 in. Hydraulic Couplers - 5500 PSI

Dixon VEP Series 3/4 in. Hydraulic Couplers - 5500 PSI

SKU:
DX6VEPF6
Manufacturer:
Size:
3/4 in.
Pressure:
5500 PSI
Weight:
1.75 LBS

As Low As:

$109.18

Features

  • Machined components are manufactured using solid steel bar stock
  • Stainless steel retaining rings and springs maximize corrosion resistance and extend service life
  • Steel componentry is plated using ROHS Compliant Zinc Nickel for superior corrosion resistance
  • Valve stems have molded Acetal seals, with a temperature range of -65°F to +212°F (-54°C to +100°C)
  • Ancillary coupler seals are Nitrile (Buna-N), with a temperature range of -40°F to +250°F (-40°C to +121°C)
  • TPC-ET Anti-Extrusion ring protects main coupling valve seal from dynamic impulse pressure damage
  • Two-stage valving to protect critical sealing components during pressurized connection & disconnection
  • Posi-Lock valve system secures valving during surge-flow conditions to prevent high-velocity damage
  • No-spill, flush face valve minimizes air inclusion during connection and spillage during disconnection
  • Threaded design eliminates premature wear or brinelling commonly found with locking ball designs when subjected to high impulse pressures
  • Fully interchangeable with Stucchi VEP-P/VEP-HD Series, DNP PST4/FSI Series, Voswinkel FT Series, Parker FET-Series, and Holmbury HFT Series
  • Available with NPTF, BSPP, ORB, and optional Code 62 Connections - Please call for details

Specifications

  • Material: Steel
  • Threading: NPTF
  • Flow: 3.5 GPM (13 L/min)
  • Maximum Impulse Pressure*: 9000 PSI (62 MPa)
  • Burst Pressure Connected: 18000 PSI (124 MPa) (165 MPa)
  • Burst Pressure Coupler**: 22000 PSI (152 Mpa)
  • Maximum Pressure Connect & Disconnect: 5500 PSI (38 MPa)
  • Temperature range: -22°F to +212°F (-30°C to +100°C)

*Couplings impulse tested in accordance with ISO7241-2 for 100,000 cycles connected and disconnected at Maximum Impulse pressure listed

**System temperature for Maximum Connect/Disconnect Pressure must not exceed 150°F (65°C)

Applications

  • High Impulse Hydraulic Applications
  • Oil Field Equipment
  • BOP Systems
  • Construction Equipment
  • Excavators
  • Crane Systems
  • Anywhere there’s a need for a tough, reliable hydraulic connection!