null

Dixon Boss 212 Clamp 1 1/2 in. Hose ID Zinc Plated Iron 4-Bolt and 4 Finger

SKU:
DX212
Manufacturer:
Size:
1 1/2 in.
Type:
Clamp
Hose OD:
2 in. to 2-8/64 in.
Material:
Plated Iron
Torque ft. lbs.:
21
Weight:
2.30 LBS

As Low As:

$22.36
Dixon Boss 212 Clamp 1 1/2 in. Hose ID Zinc Plated Iron 4-Bolt and 4 Finger

Dixon Boss 212 Clamp 1 1/2 in. Hose ID Zinc Plated Iron 4-Bolt and 4 Finger

SKU:
DX212
Manufacturer:
Size:
1 1/2 in.
Type:
Clamp
Hose OD:
2 in. to 2-8/64 in.
Material:
Plated Iron
Torque ft. lbs.:
21
Weight:
2.30 LBS

As Low As:

$22.36

Dixon Boss 212 clamp is for use with Boss System stems and couplings. The 4 bolt and 4 gripping finger clamps are designed for use on larger diameter hoses. The Clamps are sized by the Hose ID and the Hose OD which has a range to allow for various outside hose dimensions.

Note: Boss Clamps are not recommended to to be reused as the bolts are designed for a single bend only.

Specs:

  • Recommended for steam service up to 450°F (232°C)
  • Constructed from zinc plated iron
  • Bolts can be retorqued
  • Torque values are for dry bolts
  • Recommended Torque: 21 ft. lbs.
  • Hose ID: 1 1/2 in.
  • Hose OD: 2 in. to 2-8/64 in.
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.