Dix-Lock N-Series interchange male end x hose barb plug. Used on utility, air, water and nitrogen lines as well as pneumatic tools.
Note: Conforms to MIL-C-3486 and A-A-50431A standards.
Features
- Machined components are manufactured using solid bar stock
- Stainless steel retaining ring and spring maximize corrosion resistance and extend service life
- Steel componentry is plated using ROHS Compliant Trivalent Chrome
- Coupling sleeve constructed of cast zinc steel
Specifications
- Material: Steel
- Hose ID: 3/4 in.
- Maximum OD: 1.4 in. (35.6 mm.)
- Body Size: 1/2 in.
- Length: 4.95 in. (125.7 mm.)
- Maximum Working Pressure: 500 PSI (35 bar)
- Maximum Burst Pressure: 11,000 PSI (755 bar)
- Temperature Range: -40°F to +250°F (-40°C to +121°C)
- Compatibility & Interchange Data:
- Conforms to MIL-C-3486 and A-A-50431A standards
- Bowes Interchange Bayonet Style
- Interchangeable with Bowes 51000-Series, National Series 'B', MacDonald Quick-Action, Campbell Single-Lock
Safety Notes
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
