BadgerFlex Polar Flow 1 in. Low Temperature Fuel Dispensing Hose - Hose Only

BadgerFlex Polar Flow 1 in. Low Temperature Fuel Dispensing Hose Description

BadgerFlex Polar Flow Low Temperature Fuel Dispensing Hose is UL listed and suitable for transferring gasoline, diesel, ethanol blends, and biodiesel blends (up to E10) in cold weather conditions (-65°F). Constructed with an inner tube made from nitrile rubber (NBR) and a chlorinated polyethylene (CPE) cover to protect the hose from external elements.

Note: Hose only (no ends). Hose is priced by the foot. Available in lengths from 5 ft. up to 200 ft.

Features

• Suitable for cold weather (-65°F to 140°F )
• Nitrile rubber (NBR) inner tube provides excellent resistant to fuel and petroleum-based fluids
• Chlorinated polyethylene (CPE) cover protects against external elements and prolongs the hose's lifespan
• Reinforced with a single layer steel wire braid which provides electrical conductivity for static dissipation
• Hose is manufactured and tested in accordance with the requirements of UL330

Specifications

• Series: Polar Flow
• Type: Fuel Dispensing Hose
• Inside Diameter (ID): 1 in. (25.4 mm.) Nominal
• Outside Diameter (OD): 1.50 in. (38.1 mm.) Nominal
• Hose Ends: None - Hose Only
• Length: Per ft.
• Inner Tube: NBR
• Antistatic Wire: Stainless Steel
• Outer Cover: CPE
• Reinforcement: Single Layer, Textile Braid
• Minimum Bend Radius: 6.50 in. (165 mm.)
• Maximum Working Pressure: 250 PSI (17.24 bar)
• Minimum Burst Pressure: 1,000 PSI (68.95 bar)
• Operating Temperature Range: -65°F to 140°F (-54°C to +60°C)
• Fluid Compatibility: Gasoline, Diesel, Ethanol Blends, and Biodiesel Blends (up to E10)
• Color: Black
• Approval: UL Recognized Component Manufactured and Tested in Accordance with the Requirements UL330
• Weight: 0.57 lbs./ft. (0.85 kg./m.)