Badger Meter Electronic Pistol Grip Meter, 1/2 in. Female NPT

SKU:
BMA2PGEW005NBAA0BAR4QRTBMTAXX
Manufacturer:
Badger Meter
Product Type:
Reads Quarts
Size:
1/2 in. FNPT
Pressure:
Up to 1000 PSI
Flow-Rate:
0.25 to 5 GPM
Weight:
3.00 LBS
$633.22
Adding to cart… The item has been added

Badger Meter's OP meters Pistol Grip (PG) series works with a variety of petroleum products that service automobiles, trucks, buses, construction equipment, and indoor/outdoor applications. Its balanced, lightweight, rugged construction and comfort grip make it the best choice for overhead hose reels and other fluid applications. The electronic register module contains a microprocessor board powered by a lithium battery with an expected life of 3 to 5 years, depending on use. It is programmed to dispense in quarts and will totalize in quarts. A calibration factor and unit of measure are programmed during factory test.

Unlike mechanical meters, these units can be electronically recalibrated in the field when necessary. A 6-digit liquid crystal display, accurate to the second decimal place, shows the exact amount of fluid dispensed. The entire register module is protected from the wear and tear of normal shop use by a rugged, glass-filled, shock-resistant nylon housing. The PG electronic meter can handle a variety of petroleum products, such as automatic transmission fluid, SAE 5w50 motor oils, SAE 80w240 gear oils, and antifreeze fluid (ethylene glycol).

Features

  • Dispense total display in pints, quarts, US gallons or liters
  • Unit of measure selectable from the front of register
  • Totalization in US gallons and liters
  • Resettable and non-resettable totalizer
  • Totalization data saved in non-volatile memory
  • Low battery indicator
  • Electronic register module contains a microprocessor board powered by a lithium battery

Specifications

  • Galvanized steel swivel inlet
  • 1/2 in. NPT (BSP) thread
  • Large 6-digit LCD display with two decimal point precision
  • Cast aluminum housings are coated with an oven-baked epoxy finish to resist scratches
  • Battery life of 3 to 5 years, depending on use
  • Aluminum body
  • Buna Seals
  • Galvanized steel swivel inlet
  • 30 in. NPT Rigid tube with tip bend automatic outlet nozzle
  • Reserved, with no certification
  • Flow: 0.25 GPM to 5 GPM ( 1.5 LPM to 15 LPM)
  • Flow rate may vary with fluid viscosity
  • Max Operating Pressure: 1000 PSI ( 67 Bar)
  • Operating temperature: -4° F to 140° F ( -20° C to 60° C)
  • Accuracy: ±0.65%
  • 4.09 in. W x 5.05 in. D x 9.53 in. H
  • Weight: 3 lb. ( 1.36 kg)

Downloads

Data Sheet (PDF Download)

Parts Sheet (PDF Download)

Brochure (PDF Download)