91 Gallon Fuel Transfer Tank w/ Fill-Rite 15 GPM Pump (12V DC)

When it comes to top-quality refueling transfer tanks, trust in JME's expertise and excellence. Our 91 Gallon Fuel Transfer Tank is DOT approved and backed by a Special Permit from the U.S. Department of Transportation, ensuring legal manufacture, marking, and selling of these high-quality aluminum refueling transfer tanks. Whether you're in commercial, state, or private applications, these tanks are built to withstand the toughest conditions and offer peace of mind with their superior construction.

Note: DOT Certified for Gasoline, Diesel, Methanol, Kerosene, Aviation fuel and other liquids

The Fill-Rite FR1210H pump model is your ultimate solution for heavy-duty fuel transfer needs. This 12V DC pump and accessory bundle are designed to provide a reliable, efficient, and long-lasting fuel transfer experience. With durable cast-iron construction, easy installation features, and a range of protective elements, this pump ensures your equipment stays operational in any condition.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

Tank Features

• Multi-Fuel Compatibility: This tank is suitable for a wide range of fuels, including gas, diesel, methanol, kerosene, and aviation fuel.
• Lockable Vent/Prevent Filler Cap: Equipped with a commercial-grade lockable vent/prevent filler cap, providing security.
• Fully Baffled Design: Features a fully baffled interior to reduce the movement of contents during transportation, ensuring stability.
• Reinforced Bungs: Two 2 in. NPT reinforced bungs, providing superior strength and compatibility with various fueling systems.
• Drain Port: Includes a 3/8 in. NPT drain for easy and convenient tank drainage when needed.
• Hold Down Brackets: Designed with hold-down brackets for secure mounting and stability during transport.
• Pressure Leak Detection Test: Prior to shipment, each tank undergoes a pressure leak detection test to ensure it is free from defects.
• Clean and Debris-Free: Our tanks are cleaned both inside and outside, ensuring they are free from debris and contaminants.
• 1-Year Limited Warranty: For added peace of mind, the manufacturer provides a 1-year limited warranty on this fuel transfer tank.
• DOT Certified Special Permit Issued: Our 91 Gallon Fuel Transfer Tank comes with a Special Permit issued by the U.S. Department of Transportation (DOT), ensuring its safety and compliance with regulations.

Pump Features

• Cast-Iron Construction: Built for rugged daily use, ensuring heavy-duty performance and long-lasting durability.
• Easy Installation: The adjustable electrical junction box allows flexible wiring and installation even in tight spaces.
• Long Life: A thermally-protected motor prevents overheating, guaranteeing a prolonged pump life.
• Equipment Safeguard: The built-in strainer effectively filters out fuel contaminants, safeguarding your equipment.
• Reliable On/Off Switch: The sturdy cast metal stopping arm ensures reliable operation, even with repeated use.
• Limited Lifetime Warranty: Our commitment to quality and your peace of mind, with industry-leading warranty coverage.

Specifications

Tank Specifications

• Capacity: 91 Gallons
• Material: Aluminum
• Cap Type: Vent/Prevent Filler Cap
• Bungs: Two 2 in. NPT Reinforced Bungs
• Drain Port: 3/8 in. NPT
• SAE 5 Bolt Flange:
  • Compatible with Rochester Gauges 6700 Series SAE 5 Bolt Top Mounting Gauge

Note 1: Mounting tabs extend out 1-1/2 in.
Note 2: Add 2-1/2 in. for cap height

Pump Specifications

• Flow Rate: Up to 15 GPM
• Voltage: 12V DC
• Inlet: 1 in.
• Outlet: 3/4 in.
• Bung Mount: 2 in. NPT
• Housing Material: Cast iron
• Horsepower: 1/4
• Power Cord Length: 18 ft.
• Amps: 20
• Duty Cycle: 30 Min
• Package Contents:
  • Fill-Rite FR1210H 15 GPM 12 Volt Pump
  • Fill-Rite 20 - 34-3/4 in. Steel Telescoping Suction Pipe
  • 3/4 in. x 12 ft. Hose w/ Static Wire
  • 3/4 in. Manual Nozzle
  • Fill-Rite 18 ft. Battery Cable

Contents

• RDS71791: 91gal TRANSFER TANK
• TUFR1210H: 15gpm 12v DC PUMP KIT
• ELL234192: LOCTITE ANTI-SEIZE 1oz TUBE

Downloads