null Skip to main content

47 Gallon Aluminum DOT Combo Refueling Transfer Tank

Ready to Ship Made in the USA
SKU:
ATTTL50CB
Manufacturer:
JME Tanks
Size:
47 Gallon
Product Type:
Combo
Material:
Aluminum
Weight:
80.00 LBS
$1,182.59
Adding to cart… The item has been added

47 Gallon Aluminum DOT Combo Refueling Transfer Tank Description

This 47 gallon aluminum refueling transfer tank is designed for diesel and gasoline, with toolbox.

*DOT Certified for Gas, Diesel, Methanol, Kerosene, Aviation fuel and other liquids.

Please Note: Additional freight charges will be included on all tanks going to Alaska, Hawaii, Puerto Rico and non-commercial addresses.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

  • The fill cap location and pump location cannot be swapped.
  • Do not install risers between the fuel tank fitting and the pump.
  • Do not use extension pipes to raise the height of the transfer pump.
  • Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Notes:

  • Mounting tabs extend out 1-1/2 in.
  • Add 2-1/2 in. for cap height
  • Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
  • Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
  • This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.

* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.

Dimensions

  • Important Notes:
  • Mounting tabs extend out 1 1/2 in.
  • Add 2 1/2 in. for fill cap height


A: 18"
B: 36¼"
C: 28"

Toolbox is 36" X 19" X 9"

Features

  • All aluminum tank construction
  • Two reinforced 2 NPT bungs that allow for reversing the pump and fill
  • Commercial prevent lockable filler cap
  • Full baffles to reduce movement of contents
  • Designed and tested for diesel and gasoline

Downloads

Installation Instructions (PDF Download)