110 Gallon Aluminum Rectangle Fuel Transfer Tank w/ Fuelworks 15 GPM Pump (12V DC)

When it comes to top-quality refueling transfer tanks, trust in JME's expertise and excellence. Our 110 Gallon Fuel Transfer Tank is DOT approved and backed by a Special Permit from the U.S. Department of Transportation, ensuring legal manufacture, marking, and selling of these high-quality aluminum refueling transfer tanks. Whether you're in commercial, state, or private applications, these tanks are built to withstand the toughest conditions and offer peace of mind with their superior construction.

Note: DOT Certified for Gasoline, Diesel, Methanol, Kerosene, Aviation fuel and other liquids

Fuelwork's 12V DC Explosion Proof Fuel Transfer Pump is a reliable and robust solution designed for the safe and efficient transfer of flammable liquids such as gasoline, diesel, and kerosene. Whether you need to transfer fuel from a tank or barrel, this pump has you covered. It comes equipped with essential features like a lockable nozzle holder, an extendable suction tube, a manual nozzle, a 14 ft. discharge hose, and a 2 in. bung adapter. Plus, it includes an extra adjustable poly suction tube, extending from 15 in. to 40 in., providing added versatility for different depth tanks.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

Tank Features

• Multi-Fuel Compatibility: This tank is suitable for a wide range of fuels, including gas, diesel, methanol, kerosene, and aviation fuel.
• Lockable Vent/Prevent Filler Cap: Equipped with a commercial-grade lockable vent/prevent filler cap, providing security.
• Fully Baffled Design: Features a fully baffled interior to reduce the movement of contents during transportation, ensuring stability.
• Reinforced Bungs: Two 2 in. NPT reinforced bungs, providing superior strength and compatibility with various fueling systems.
• Drain Port: Includes a 3/8 in. NPT drain for easy and convenient tank drainage when needed.
• Hold Down Brackets: Designed with hold-down brackets for secure mounting and stability during transport.
• Pressure Leak Detection Test: Prior to shipment, each tank undergoes a pressure leak detection test to ensure it is free from defects.
• Clean and Debris-Free: Our tanks are cleaned both inside and outside, ensuring they are free from debris and contaminants.
• 1-Year Limited Warranty: For added peace of mind, the manufacturer provides a 1-year limited warranty on this fuel transfer tank.
• DOT Certified Special Permit Issued: Our 110 Gallon Fuel Transfer Tank comes with a Special Permit issued by the U.S. Department of Transportation (DOT), ensuring its safety and compliance with regulations.

Pump Features

• Efficient Performance: This 12V pump delivers fuel at an impressive 15 GPM for quick transfers.
• Certified Safety: CSA certified with a UL-listed nozzle for your peace of mind.
• Durable Build: Heavy-duty cast iron pump chamber ensures long-lasting performance.
• Enhanced Safety: Equipped with thermal protection and a secure mechanical seal.
• Optimized Functionality: Includes a bypass valve and an inlet filter screen for efficient and clean fuel transfer.

Specifications

Tank Specifications

• Capacity: 110 Gallons
• Material: Aluminum
• Cap Type: Vent/Prevent Filler Cap
• Bungs: Two 2 in. NPT Reinforced Bungs
• Drain Port: 3/8 in. NPT
• Dimensions: 23 1/2 in. x 48 1/2 in. x 24 in.

Note 1: Mounting tabs extend out 1-1/2 in.
Note 2: Add 2-1/2 in. for cap height

Pump Specifications

• Pump Type: Vane Pump
• Inlet/Outlet Size: 1 in.
• Flow Rate: 15 GPM
• Voltage: 12V DC
• Power: 180 Watts
• Maximum Amperage: 22A
• Duty Cycle: 30 minutes
• Power Cable Length: 16 ft.
• Nozzle Type: Manual
• Hose Inner Diameter: 3/4 in. x 14 ft.
• Package Contents:
  • 12V DC Explosion Proof Fuel Transfer Pump
  • Manual Nozzle
  • Lockable Nozzle Holder
  • Metal Suction Tube (27 in. to 37 in.)
  • Poly Suction Tube (15 in. to 40 in.)
  • Discharge Hose (3/4 in. x 14 ft.)
  • 2 in. Bung Adapter

Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Notes:

• Mounting tabs extend out 1-1/2 in.
• Add 2-1/2 in. for cap height
• Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
• This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.

* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.

Contents

• ATTTR110: 110 gallon rectangular refueling tank
• ITI10305708: Fuel transfer pump kit 12V 15gpm
• ITI17920051: 3-PC 37 in. drop tube

Downloads