null Skip to main content
Roth Double Wall Oil Tank with Graco 1050 Diaphragm Pump Accessory Package

Roth Double Wall Oil Tank with Graco 1050 Diaphragm Pump Accessory Package

SKU:
Please choose an option below
Manufacturer:
Roth
Product Type:
Double Wall Tank Kit
Pressure:
100 PSI
Flow-Rate:
50 GPM
Weight:
226.00 LBS
$4,019.52 - $5,781.47
Adding to cart… The item has been added

These tank packages include a UL Listed Graco Husky 1050 air operated double diaphragm pump, Graco SD Series hose reel and an option of a Graco EM8 manual meter control valve or a LDP5 preset meter control valve along with a double wall Roth Oil Tank with four 2 in. Female NPT bung openings. These tank packages are suitable for storage and dispensing of diesel and bio fuels, motor oil and anti-freeze, ATF or similar products up to SAE 90. The package comes with all necessary components to start dispensing fluid, just connect to shop air.

Features

Pump Features

  • Graco Husky 1050 AODD Pump – UL listed
  • Power Type: Pneumatic
  • Air Inlet Size: 1/2 in.
  • Fluid Inlet Size: 1 in.
  • Fluid Outlet Size: 1 in.
  • Max Flow-Rate: 50 GPM
  • Maximum Air Inlet Pressure: 100 PSI (.7 MPa)
  • Maximum Working Pressure: 100 PSI (.7 MPa)
  • Wetted Material: Aluminum, TPC-ET, Acetal, PTFE, Nitrile Rubber
  • The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps. For use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil, water, anti-freeze and lubricating oil. UL Listed for pumping gasoline and gas/alcohol blends up to 10% ethanol diesel fuel, fuel oil and lubricating oil.

Tank Features

  • Inner tank made of blow-molded, high-density, seamless polyethylene that is leak-proof and will never corrode
  • Outer tank is made of weld-free galvanized steel and roll seamed with an oil and fire-resistant seal
  • Outer tank holds 110 percent of inner tank for maximum protection
  • Extremely light, up to 50 percent lighter than conventional steel tanks
  • Can be used for diesel and bio fuels, motor oil and ATF
  • Compact, economical design (8 sq. ft. for 1000L)
  • Wide handles on each end allow you to transport and handle with ease
  • Four 2 in. FNPT bung openings
  • UL 2258 certified

Package Contents

  • Roth tank, double wall 110, 165, 275 or 400 gallons
  • Graco SD Spring Rewind Hose Reel with ½ in. x 50 in. dispensing hose
  • Graco Husky 1050 AODD pump – UL listed with suction tube
  • Meter Control Valve Option: Graco EM8 Manual Valve with Flex Hose or Graco LDP5 Preset Valve with Flex Hose
  • Air filter/regulator with auto drain 1/2 in. NPT(F)
  • 2 ft. reel inlet hose
  • 5 ft. air connecting hose
  • Air quick connect coupler & nipple
  • Roth fluid level gauge
  • Leak sight gauge
  • Vented fill cap
  • Pump & reel bracket
  • Tank base
  • Miscellaneous fittings

NOTE: To prevent damage during shipment, the tank components are shipped unassembled to the tank. Components will need to be assembled onto the tank with the directions that are provided with shipment.

Tank Dimensions

Tank Dimensions
Tank ModelDWT 400LDWT 620LDWT 1000LDWT 1500L
Nom. Capacity 110 Gal. 165 Gal. 275 Gal. 400 Gal.
Length 29 in. 29 in. 43 in. 64 in.
Width 28 in. 28 in. 28 in. 30 in.
Height 44 in. 61 in. 61 in. 68 in.
Min. Height Required 49 in. 66 in. 66 in. 76 in.
Tank Weight 106 lbs. 132 lbs. 167 lbs. 333 lbs.
Shipping Weight 115 lbs. 143 lbs. 185 lbs. 358 lbs.

Approximate Footprint for Multiple DWT Installations
Tank ModelDWT 400LDWT 620LDWT 1000LDWT 1500L
2 Tanks (Side by Side) 29 x 60 in. 29 x 60 in. 43 x 60 in. 64 x 63 in.
3 Tanks (Side by Side) 29 x 92 in. 29 x 92 in. 43 x 92 in. 64 x 96 in.
4 Tanks (Side by Side) 29 x 124 in. 29 x 124 in. 43 x 124 in. NA
5 Tanks (Side by Side) 29 x 156 in. 29 x 156 in. 43 x 156 in. NA
2 Tanks (End to End) NA NA 28 x 90 in. NA

Related Products

!