RDS Manufacturing 113 Gallon Aluminum Rectangle Transfer Tank w/ GPI Direct Mount 12V DC 15 GPM Fuel Transfer Pump

RDS Manufacturing 113 Gallon Aluminum Rectangle Transfer Tank w/ GPI Direct Mount 12V DC 15 GPM Fuel Transfer Pump

The RDS Manufacturing 113 Gallon Aluminum Rectangular Transfer Fuel Tank is a high-performance, DOT-approved solution for transporting diesel, gasoline, or aviation fuel. Proudly made in the USA, this tank is constructed from heavy-duty, rust-resistant 0.125-inch aluminum and features fully welded seams for superior durability. Each tank undergoes 100% pressure testing to ensure leak-free performance. Designed with built-in baffles to minimize fuel sloshing and a vehicle rollover safety valve, this tank offers both safety and reliability. Ideal for commercial and industrial use, it includes a 2-inch female pipe thread coupling for a manual or 12V transfer pump (sold separately) and a 3/8-inch NPTF(F) drain plug for easy maintenance.

Note: Transfer tanks have a drain plug and can be used to gravity feed diesel.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

Tank Features

• Heavy-Duty Aluminum Construction: Built from 0.125-inch thick aluminum that resists rust and corrosion for long-lasting performance.
• DOT Approved for Fuel Transport: Certified for safe transport of diesel, gasoline, or aviation fuel.
• Fully Welded and Pressure Tested: Every tank is 100% pressure tested and features fully welded seams to prevent leaks.
• Built-In Safety and Stability: Includes internal baffles to reduce fuel movement and a rollover safety valve for added protection.
• Pump-Ready Design: Equipped with a 2-inch female pipe thread coupling compatible with manual or 12V transfer pumps (sold separately).

Pump Features

• 12V DC
• Economy model with direct tank mounting
• Extremely long life and trouble-free mounting positions
• Cast aluminum construction
• Flow rate: 15 GPM / 57 LPM
• Inlet: 1", Outlet: 3/4"
• Low profile design for increased visibility when used on mobile trucks and pickups trucks
• Circuit breaker motor protection
• Suitable for use with diesel fuel, up to 20% biodiesel blends such as B20, gasoline, up to 15% alcohol blends such as E15, kerosene
• Empties 100 gallon mobile tanks in approximately 7 minutes
• 30 mins ON / 30 mins OFF duty cycle
• Standard nozzle holder
• Trim-to-fit suction pipe
• CSA Certified, two year warranty
• Common Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Specifications

Tank Specifications

• Capacity: 113 Gallon
• Dimensions: 48 in. L x 23 3/4 in. W x 26 in. H
• Finish: Diamond Plated
• Material: Aluminum
• Shape: Rectangle
• Weight: 115 lbs. (Assembled)

Pump Specifications

• Accessories: 3/4 in. x 10 ft. Buna-N discharge hose, manual or automatic nozzle
• Bung: 2 in. NPT
• Cord Length: 18 ft. (5.5 m)
• Current Draw: 18 amp
• Duty Cycle: 30 min. ON, 30 min. OFF
• Electrical Input: 12V DC
• Fuse: 25 amp
• Inlet: 1 in. NPT
• Motor: 1/5 HP (150 watts), 1900 RPM, UL Listed, CSA Certified
• Motor Protection: 20 amp circuit breaker
• Operating Pressure: 15 PSI
• Operating Temperature: -20°F to +125°F (-29°C to +52°C)
• Outlet: 3/4 in. NPT
• Pump Housing: Cast aluminum
• Pump Rate: Up to 15 GPM (57 LPM)
• Shipping Weight: 23 lbs. (manual), 24 lbs. (automatic)
• Suction Lift: Manual – 5.5 ft. (1.7 m), Automatic – 4.8 ft. (1.5 m)

Important Notes:

• Mounting tabs extend out 1 in. - adds 2 in. to total length and 1 in. to total width
• Add 2 1/2 in. for fill cap height
• Always measure the truck's bed for clearance at corners, wheel wells, etc.

Downloads

Installation Instructions (PDF Download)

RDS DOT Permit (PDF Download)