RDS Manufacturing 113 Gallon Aluminum Rectangle Transfer Tank w/ Fill-Rite FR8 12V DC 8 GPM Fuel Transfer Pump

RDS Manufacturing 113 Gallon Aluminum Rectangle Transfer Tank w/ Fill-Rite FR8 12V DC 8 GPM Fuel Transfer Pump 

The RDS Manufacturing 113 Gallon Aluminum Rectangular Transfer Fuel Tank is a high-performance, DOT-approved solution for transporting diesel, gasoline, or aviation fuel. Proudly made in the USA, this tank is constructed from heavy-duty, rust-resistant 0.125-inch aluminum and features fully welded seams for superior durability. Each tank undergoes 100% pressure testing to ensure leak-free performance. Designed with built-in baffles to minimize fuel sloshing and a vehicle rollover safety valve, this tank offers both safety and reliability. Ideal for commercial and industrial use, it includes a 2-inch female pipe thread coupling for a manual or 12V transfer pump (sold separately) and a 3/8-inch NPTF(F) drain plug for easy maintenance.

Whether you're in landscaping, light construction, agriculture, or just enjoying the great outdoors, the FR8 offers a convenient, efficient, and spill-free refueling experience that traditional methods just can't match. This lightweight, compact fuel transfer pump brings the gas station to you, ensuring a smoother, more efficient workflow and recreational activities. Ideal for small equipment, this pump is the go-to choice, providing true 8 GPM performance equivalent to gas station pumps.

Common Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Note: The FR8 pump is lockable, recommended lock to use is Master Lock 140DLH

Note: Transfer tanks have a drain plug and can be used to gravity feed diesel.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

Tank Features

• Heavy-Duty Aluminum Construction: Built from 0.125-inch thick aluminum that resists rust and corrosion for long-lasting performance.
• DOT Approved for Fuel Transport: Certified for safe transport of diesel, gasoline, or aviation fuel.
• Fully Welded and Pressure Tested: Every tank is 100% pressure tested and features fully welded seams to prevent leaks.
• Built-In Safety and Stability: Includes internal baffles to reduce fuel movement and a rollover safety valve for added protection.
• Pump-Ready Design: Equipped with a 2-inch female pipe thread coupling compatible with manual or 12V transfer pumps (sold separately).

Pump Features

• Proven Reliability: Sliding vane technology maintains perfect clearances and consistent performance over the entire life of the pump
• Hassle-Free: Refueling with the FR8 eliminates the hassle, spills, and wasted time caused by clunky and inefficient gas cans
• Ultra Lightweight: Under 13 pounds, the FR8's compact and lightweight design reduces stress on your transfer tank
• Elite Endurance: The FR8 has a 15 minutes on, 15 minutes off duty cycle, so you can pump TWICE as much as the competition
• Peace of Mind: The FR8's thermally-protected motor shuts down if it gets too hot, so you never have to worry about it overheating
• True 8 GPM Performance: Delivers the same performance as gas stations pumps, making it ideal for filling equipment with 2–25-gallon fuel tanks

Specifications

Tank Specifications

• Capacity: 113 Gallon
• Dimensions: 48 in. L x 23 3/4 in. W x 26 in. H
• Finish: Diamond Plated
• Material: Aluminum
• Shape: Rectangle
• Weight: 115 lbs. (Assembled)

Pump Specifications

• Flow-Rate: 8 GPM / 30 LPM
• Max discharge Pressure: 12 PSI
• Strainer mesh: 20x20 micron
• Voltage: 12V DC
• Inlet: 1 in. NPT
• Outlet: 3/4 in. NPT
• Suction Lift: 6 ft.
• Duty Cycle: 15 min on / 15 min off
• Tank Mount:
  • Mounting Size: 2 in. NPT
  • Thread: Buttress
  • Type: Rotary Vane
• Package Contents:
  • FR8 12V DC 8 GPM Fuel Transfer Pump
  • 3/4 in. X 12 ft. Hose with Static Ground Wire
  • 3/4 in. Cast Aluminum Manual Nozzle
  • Ground Wire

Important Notes:

• Mounting tabs extend out 1 in. - adds 2 in. to total length and 1 in. to total width
• Add 2 1/2 in. for fill cap height
• Always measure the truck's bed for clearance at corners, wheel wells, etc.

Downloads

Installation Instructions (PDF Download)

RDS DOT Permit (PDF Download)