The PetroClear® 40510W-AD is a spin-on filter designed to remove particulate (10 micron) and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. This filter will not sense nor react to water in Ethanol blended gasoline (Reaction known as phase separation).
This filter has a standard 1-1/2 – 16 UNF mounting thread (1 in. flow) required for most spin-on filter adapters used in aftermarket and/or high-flow applications such as Gilbarco, Wayne, Bennet, Tokheim and other major manufacturers’ dispensers.
Notes: Designed for particulate removal (10 micron) and senses both free and emulsified water in neat gasoline. Will not detect phase separation in Ethanol blended fuels. Not to be used in aviation fuel applications.
Features
- Designed for particulate removal (10 micron) and senses both free and emulsified water
- Compatible with neat gasoline, ethanol blended fuels and all diesels, including biodiesel fuels
- Once filter has absorbed 5.9 ounces (175 mil) of water, flow will noticeably slow
- Will not detect phase separation in Ethanol blended fuels
- Textured paint coating helps ensure a simple, mess-free installation and removal process
- UL® recognized
Specifications
- Model: 40510W-AD
- Filter Type: Spin-On
- Media Type: Cellulose with Super Absorbent Media (Particulate Removing and Water Sensing)
- Micron Rating: 10 Micron (Nominal)
- Absorption: Once filter has absorbed 5.9 ounces (175 mil) of water, flow will noticeably slow
- Diameter: 3.70 in.
- Height: 5.36 in.
- Mounting Thread: 1 1/2 in. - 16 UNF
- Recommended Adapter: 1 in. NPT Aluminum Single Adapter (CIM400UL)
- Flow Rate: 25 GPM (94.6 LPM)
- Flow: 1 in. Flow
- Shell Thickness: 0.020
- Gasket Material: Nitrile Rubber
- Max. Operating Pressure: 50 psi (3.4 bar)
- Collapse (Min.) 150 psid (10.3 bar)
- Burst (Min.) 500 psi (34.5 bar)
- Operating Temp. Range: -20 - 250°F (-28.9 - 139°C)
Downloads
Petroclear Filter Label Legend (PDF Download)
