Parker Velcon CLEANDiesel® 6 in. x 44 in. DI Coalescer Filters - 10 Micron

Velcon’s DI coalescers in combination with DSO separators, contaminated fuels are cleaned to a level that meets stringent downstream fuel cleanliness standards for petroleum based diesel fuels.

The first stage in the DI coalescer removes particles through an inside-out flow and coalesces emulsified water into large droplets, which then fall to the housing sump.

In the second stage, an outside-in process, the DSO separator creates a hydrophobic barrier to block the coalesced water droplets from flowing downstream of the housing.

This multi-stage design assures the fuel is conditioned to a clean and dry state, ready for use.

• Water coalescing is not effective in the presence of fuels containing high levels of surfactants/alcohols or unrefined biofuels
• Detergents and additives inhibits the ability of coalescers to effectively remove water by reducing Interfacial Tension (IFT) and can eventually disarm coalescers

Features

• Extended equipment up-time
• Reduced operating costs
• Reliable fuel injector performance
• Reduced fuel system maintenance

Specifications

• Filter Type: Coalescer
• Brand: CLEANDiesel®
• Fluid Compatibility: Petroleum Based Diesel Fuels
• Micron Rating: 10 - Provides effective particle removal with industry proven coalescing technology
• Inside Diameter: 3.5 in.
• Outside Diameter: 6 in.
• Length: 44 in.
• Filter Construction: Fiberglass
• End Cap Configuration: Threaded Base
• Seal Material: Buna-N
• pH Range: 5 - 9 - Continuous Operation
• Flow Rate: Depends on Fluid Viscosity and Application
• Maximum Burst Pressure: 75 PSI (5.2 Bar)
• Maximum Operating Temperature: 150°F (65°C)
• Changeout Pressure Differential: 25 PSI (1.7 Bar)
• Downstream Free-Water Level Typically Below 50 ppm
• DI - Coalescer Flow Direction - Inside to Outside
• DSO - Separator Flow Direction - Outside to Inside