Morrison Bros. Transfer Tank Locking Cap

Designed for tank filling applications where a tight fill connection is not required. The female threaded cap threads onto a male riser pipe or onto the male threaded adaptor.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features & Benefits

• Patented Spin Secure locking design provides maximum fuel theft protection
• Threaded adaptor can be permanently installed into cap converting it to a male threaded cap
• Cap has built-in fusible material that vents for thermal relief at 195º (+/- 10º)
• Cap is vapor tight when properly installed
• Can be ordered in "keyed alike" quantities

Construction Details

• Cap: Zamack 3
• Adaptor: Zamack 27
• O-ring: Viton

Downloads

Specifications Sheet (PDF Download)