Morrison Bros. 9095SA 2 in. AST Overfill Prevention Valve for Remote Fill

The 9095SA Aluminum Overfill Prevention Valve is installed at the fill port of a storage tank. Used in a pressurized tight fill application, the valve helps prevent tank overfills by closing when the liquid level reaches a pre-set warning level (90-95% full).

The valve is installed on a standard 2” NPT male connection and has a built-in bleed hole that allows the fill hose pressure to be relieved after the valve closes. This bleed hole also provides anti-siphon protection for the valve.

The 9095SA comes with a 2" Part A for mounting the valve with a 2" NPT pipe going to a remote fill.

Features

The valve design allows for a full flow fill until it closes.

Designed for fuel not requiring a drop tube.

A field adjustable float allows the installer to set the desired shut-off point. The vertical float allows for installation in openings in proximity to the tank walls.

The valve shut-off length is field adjustable from 2 to 12 inches. 

The valve can be installed in various configurations on the tank:

  -Directly onto the top of the tank without a spill container. 

  -Between a Morrison 517 Spill Container and the tank top.

  -Inside a Morrison 2” 518 Spill Container.

  -Inside 2” 516 spill container when used with 305C--0000 AC cap.

  -Directly into the tank top with 2” NPT piping going to a remote fill.

A pressurized tight fill connection is required for operation