Master Pneumatic FD10 Series Sentry Modular General Purpose Air Filter w/ Auto Drain, 5 Micron

General purpose modular air filters remove water and particulate material from the air stream to protect downstream equipment from contamination. As air enters the filter the internal baffles create a swirling motion so that dirt and liquids are thrown against the side of the filter bowl and then fall into the bottom of the bowl. This model has an automatic drain for use in difficult to reach areas and can't be accessed to drain frequently. The automatic drain provides an effective way to maximize filter performance and reduce maintenance. Available in 1/8 in. & 1/4 in. port size.

Modular air filters must be cleaned on a regular basis in order to rid them of water and other contaminants. A filter with a manual drain must be removed regularly to remove water so it does not clog the filter. The pressure drop across filter elements increases as they continue to remove dirt from the air. Under average conditions filter elements should be replaced each year.

The plastic bowl on the modular filter is made of tough transparent high-strength polycarbonate. Bowls are intended for use with compressed air, and can be adversely affected if contaminants such as alcohol or liquified petroleum gas are in the intake air. Some compressor oils, solvent fumes and other substance can attack the bowl and lead to failure. To clean the bowl wipe the inside and outside with a clean dry cloth and inspect for cracks or scarring on the surface, if either condition occurs it is an indication that the ambient air contains harmful substances and the bowl should be replaced.

Here is a list harmful substances to polycarbonate bowls: acetone, ammonia, benzene, brake fluid, carbon disulfide, carbon tetrachloride, ethyl acetate, ethylene glycol, Freon, lacquer thinner, nitrocellulose lacquer, sodium hydroxide, toluene, turpentine and many others. Made in the USA.

Features

• Modular assembly and mounting
• Threaded port fittings
• 5 micron rated polyethylene filter element
• High-strength polycarbonate plastic filter bowl
• Internal automatic drain

Specifications

• Ambient/Media Temperature: 40° to 125°F (4° to 52°C)
• Bowl Capacity: 2 oz. (60 ml)
• Bowl Material: polycarbonate plastic
• Bowl Drain: Automatic
• Body: Acetal
• Inlet Pressure:15 PSI to 150 PSI
• Filter Element: 5 micron polyethylene
• Seals: Nitrile
• Dimensions: 3.0 in. W x 1.8 in D x 4.4 in H

Downloads

Specifications (PDF Download)

Installation (PDF Download)