Lechler 527 Series 3A 316 SS Slip-On 360° Stationary Spray Ball, 3/4 in. Dia., 127 GPM

Lechler USA
3/4 in.
Stainless Steel
Mount Type:
Slip -On
127 GPM
20 PSI
8.2 ft. Diameter Tank
0.11 LBS
Adding to cart… The item has been added

The Series 527 spray ball is ideal for the cleanest clean. The 3A certification also makes the products of series 527 suitable for areas with the highest of hygiene requirements, including your food and beverage needs. The Series 527 spray balls clean with powerful solid jets, have a high surface quality and are also reliably resistant to high temperatures. Beer, dairy, wine, etc., it is approved for your most hygienically sensitive container cleaning jobs.

Lechler tank and equipment cleaning nozzles are used for thorough cleaning of all kinds of tank sizes, machines and equipment. Cleaning nozzles achieve high cleaning performance even at low pressures. This saves on high energy costs. The nozzles are driven and lubricated by the cleaning fluid and are therefore maintenance-free and reliable.

Stationary spray balls do not rotate and therefore require considerably more fluid. They are used primarily for rinsing tanks. The force of impact when using a liquid jet on a surface plays an important role in cleaning technology. The impact surface is the area where the droplet strikes. The smaller the surface area, the greater the impact values. Increasing the flow rate by using a larger nozzle increases the impact, assuming that the other parameters (spray angle, pressure and medium) remain the same.


  • Robust compact design
  • Complies with 3A standards
  • Slip-on connection
  • Powerful solid jet
  • Suitable for very high temperatures
  • Suitable for operation with steam
  • Stainless R-clip included


  • Stationary spray ball
  • Spray angle: 360°
  • 3/4 in. opening
  • Slip-on connection
  • Recommended operating pressure: 20 PSI
  • Flow rate: 127 GPM (480 LPM)
  • Max tank diameter: 8.2 ft.
  • Maximum operating temperature: 400° F
  • Maximum ambient temperature: 400° F
  • Surface quality: ≤ 0.8 Micron
  • Material: 316 Stainless steel
  • Insertion diameter: 1.3 in.
  • Narrowest free cross section: 1.7 in.
  • Installation: Operation in every installation position
  • Suitable for steam
  • No Bearing
  • Recommended filter: Smaller than the narrowest cross-section
  • Meets FDA requirements
  • 3A rated


Specifications (PDF Download)

Brochure (PDF Download)