GPI FLOMEC® G-100-3A-2 1 in. Stainless Steel Meter w/Sanitary Clamp Fitting - 6.7 to 67 GPM, 40 Mesh

The GPI FLOMEC GSCPS meter meets the strict 3-A Sanitary Standards using the new “Third Party Verification (TPV) program for any food and beverage application. Our methods of design, construction and traceability of components have been reviewed and approved. The internals of this meter are machined or polished to meet 3-A self-draining and cleaning requirements. The GSCPS Meter meets Clean in Place (CIP), Steam in Place (SIP) and Clean Out of Place (COP) requirements.

This sanitary clamp flow meter is made with PEEK and stainless steel components and is an excellent choice for milk products and other beverages.

Features

• Meets Clean in place (CIP), Steam in place (SIP),and Clean out of place(COP) requirements for use in any sanitary procedure that works best for the application
• High quality
• Extremely accurate
• Sanitary clamp fittings
• 3A sanitary standards
• 2-Wire Sine wave pulse magnetic pick-up coil with 10 ft of shielded cable
• Expansive working temperature: -100° F to 250°F ( -73° C to 121°C) to work in various stages of food and beverage processes

Specifications

• Design Type: Turbine
• Pipe Size: 1 in
• Connection Type: 1 1/2 in. Tri-Clamp
• Pickup Coil Type: 2 Wire
• Flow Rate: 6.7 to 67 GPM ( 25 to 252 LPM)
• Mesh: 40
• Fitting: Sanitary Clamp
• Accuracy: ±0.5% Linearity
• Repeatability: ±0.1%
• Operating Temperature: -100ºF to 225ºF (-74ºF to 107ºC), for SIP up to an hour 285ºF ( 140ºC)
• Frequency: 100 to 1000 Hz
• Approvals: 3A Approved Sanitary Rating, CE, CIP,COP, SIP
• Pressure Rating: Limited by fitting size, clamp size, & temp.
• Wetted Materials:
• 316 Stainless Steel Housing
• Nickel Plated CD4MCu Stainless Steel Rotor
• 316 Stainless Steel Rotor Supports
• 316 Stainless Steel Shaft
• PEEK Sleeve Bearings
• PEEK Thrust Bearings
• 300 Series Stainless Steel Rings

Liquids

• Milk
• Water
• Light Oils
• Beer
• Alcohols
• Filtered Wine
• Deionized Water
• Vinegar
• Juice
• CIP Solution

Downloads

GPI Flomec G Series Turbines Owners Manual (PDF Download)